Logged Codes Must Be Cleared During Pre-delivery Inspections Caterpillar

Logged Codes Must Be Cleared During Pre-delivery Inspections

Usage:

Logged Codes Must Be Cleared During Pre-delivery Inspections

CONFIDENTIAL TIBU2682-00

Show/hide table

TECHNICAL INFORMATION BULLETIN	December 03, 2003
Motor Graders	120H (ALZ, 124, CAF) 12H (AMZ, 125, CBK) 135H (AMX, CBC) 140H (APM, 126, CCA) 143H (APN) 14H (ASE) 160H (ASD, CCP) 163H (ARL) 16H (ATS)
Component Code(s)	7490

SUBJECT: Logged Codes Must Be Cleared During Pre-delivery Inspections

PROBLEM:

Logged codes in the Electronic Monitoring System (EMS) are causing confusion during the pre-delivery inspections. These codes are caused by road tests or transportation of the machine.

SOLUTION:

Delete all the logged codes during the pre-delivery inspection. Only the active codes need to be corrected.

COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding

Two Lubrication Holes Have Been Omitted In the 7S-8580 Rotation Clutch Carrier Two Lubrication Holes Have Been Omitted In the 7S-8580 Rotation Clutch Carrier

192-9969 BEARING AND 192-9970 BEARING MAY HAVE BEEN MANUFACTURED INCORRECTLY 192-9969 BEARING AND 192-9970 BEARING MAY HAVE BEEN MANUFACTURED INCORRECTLY

THE MAGNETS ON THE 178-5062 MAGNETIC SCREEN MAY LOOSEN IN OPERATION THE MAGNETS ON THE 178-5062 MAGNETIC SCREEN MAY LOOSEN IN OPERATION

Spark Arrestor Muffler Failure Spark Arrestor Muffler Failure

Support Bracket for the Rotary Beacon Interferes With the Cab Support Bracket for the Rotary Beacon Interferes With the Cab

HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST

Inspection of the Gear Pump for the Hoist on the 797 Off-Highway Trucks is Required Inspection of the Gear Pump for the Hoist on the 797 Off-Highway Trucks is Required

New Method of Engaging the Parking Brake on Motor Graders New Method of Engaging the Parking Brake on Motor Graders

Drive Shaft U-Joint Bolts May Not Have the Proper Torque on Certain Motor Graders Drive Shaft U-Joint Bolts May Not Have the Proper Torque on Certain Motor Graders

New Method for Shipping Mirrors for the Motor Graders New Method for Shipping Mirrors for the Motor Graders

Requesting Information on Motor Grader Films Requesting Information on Motor Grader Films

THE ALTERNATOR PULLEY MAY BE ASSEMBLED INCORRECTLY THE ALTERNATOR PULLEY MAY BE ASSEMBLED INCORRECTLY

THE HOSE THAT CONNECTS THE CASE TO THE TRANSMISSION MAY NOT SEAL PROPERLY THE HOSE THAT CONNECTS THE CASE TO THE TRANSMISSION MAY NOT SEAL PROPERLY

030-7965 ELBOW MAY BE MISSING FROM RADIATOR GROUP 030-7965 ELBOW MAY BE MISSING FROM RADIATOR GROUP

2ND REDUCTION FINAL DRIVE BEARINGS MAY FAIL PREMATURELY 2ND REDUCTION FINAL DRIVE BEARINGS MAY FAIL PREMATURELY

THE BLOWER RESISTER MAY BE WIRED INCORRECTLY THE BLOWER RESISTER MAY BE WIRED INCORRECTLY

2ND REDUCTION FINAL DRIVE BEARING MAY FAIL PREMATURELY 2ND REDUCTION FINAL DRIVE BEARING MAY FAIL PREMATURELY

NEW SHIPPING CONFIGURATION FOR 769D/771D OFF-HIGHWAY TRUCKS NEW SHIPPING CONFIGURATION FOR 769D/771D OFF-HIGHWAY TRUCKS

2ND REDUCTION FINAL DRIVE BEARING MAY FAIL PREMATURELY 2ND REDUCTION FINAL DRIVE BEARING MAY FAIL PREMATURELY

2ND REDUCTION FINAL DRIVE BEARING MAY FAIL PREMATURELY 2ND REDUCTION FINAL DRIVE BEARING MAY FAIL PREMATURELY

THE BUSHING IN THE PIVOT BORE MAY MOVE AND PREVENT LUBRICATION OF THE BORE THE BUSHING IN THE PIVOT BORE MAY MOVE AND PREVENT LUBRICATION OF THE BORE

THE 154-8237 BEARING, WHICH IS USED IN THE INPUT PLANETARY, MAY NOT ASSEMBLE CORRECTLY THE 154-8237 BEARING, WHICH IS USED IN THE INPUT PLANETARY, MAY NOT ASSEMBLE CORRECTLY

3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT 3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT