1999/06/01 Caterpillar


New Exhaust Manifold Groups (Bellows Type) Used{1059}

Usage:


769D (5SS82-Up),
771D (6YS79-Up),
773D (7CS76-Up),
775D (8AS88-Up) Off-Highway Trucks

SUPPLEMENT: AUGUST 2, 1999

Service Magazine SEPD0474, Article 9, Page 9, June 1, 1999; "New Exhaust Manifold Groups (Bellows Type) Used".

The last paragraph was incorrect and should be replaced with the following paragraph.

The new 164-4603 Manifold Gorup (Exhaust) is a direct replacement for the former 129-6834 Manifold Group (Exhaust) on 773D and 775D Off-Highway Trucks. The 164-4603 Manifold Group (Exhaust) is not serviced at the group level. Order the components individually. The components of the group are identified in Parts Manual 773D Truck (7CS-Up), SEBP2670, or Parts Manual 775D Truck (8AS-Up). SEBP2767. The 164-4603 Manifold Group (Exhaust) asa whole is a direct replacement for the former 129-6834 Manifold Group (Exhaust).

--------------- END SUPPLEMENT ---------------

Description of Change: New bellows type exhaust manifold groups have replaced former slip joint type exhaust manifold groups on the engines in these machines. The bellows exhaust manifolds were designed to improve the exhaust manifold stud durability.

Adaptable To: The new 166-0164 Manifold Gp (Exhaust) is a direct replacement for the former 9Y-1232 Manifold Gp (Exhaust) on 769D and 771D Off-Highway Trucks. The 166-0164 Manifold Gp (Exhaust) is not serviced at the group level. Order the components individually. The components of the group are identified in Parts Manual (769D Truck (5SS-Up), SEBP2668 or Parts Manual (771D Truck (6YS-Up), SEBP2766. The 166-0164 Manifold Gp (Exhaust) as a whole is a direct replacement for the former 9Y-1232 Manifold Gp (Exhaust).

The new 166-4603 Manifold Gp (Exhaust) is a direct replacement for the former 129-6834 Manifold Gp (Exhaust) on 773D and 775D Off-Highway Trucks. The 166-4603 Manifold Gp (Exhaust) is not serviced at the group level. Order the components individually. The components of the group are identified in Parts Manual (773D Truck (7CS-Up), SEBP2670 or Parts Manual (775D Truck (8AS-Up), SEBP2767. The 166-4603 Manifold Gp (Exhaust) as a whole is a direct replacement for the former 129-6834 Manifold Gp (Exhaust).

Caterpillar Information System:

1999/06/01 Improved Counterweight Group Eases Retaining Rod Installation{7056}
1999/06/01 Addition Of Drainage Hole Eliminates Water Accumulation In Winch Frame{7053}
1999/06/01 New Boom Upper Sheave Block Improves Cable Spooling{5415}
1999/06/01 Pump And Suction Elbow Changes Improve Assembly Alignment{5084}
1999/06/01 Backhoe Loader Window Latch Rod Now Serviceable{7308}
1999/06/01 Special Instruction, REHS0377, Available For Installing Spacers On New Backhoe Loader Booms For The Fitup Of Hydraulic Lines{5057}
1999/05/24 Air Conditioner Service Tips{7320,7337}
1999/05/24 New DT Connector Plugs With Improved Seal Retention{1408,7553}
1999/05/24 New Main Bearing Material{1203}
1999/05/24 New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450,0734,7002}
1999/05/24 New 153-9630 Sensor Test Group Adapter Kit For DataView Now Available{1000,3000,4000,5000,6000,0788,0785}
1999/05/24 New Frame Leveling Valve Available{5144}
1999/06/01 Correction To Certain Off-Highway Truck Service Manual Modules{0374}
1999/06/01 Correction To Special Instruction REHS0263; 785C Off-Highway Truck Assembly Procedure{0374,7960}
1999/06/01 785 Steering Pump (4T-0382) Installation/Startup Procedure{4306}
1999/06/01 Special Instruction Available For Adjusting The Hydraulic Electronic Controls{0374,5702}
1999/06/01 New Vibratory Pump And Higher Efficiency Motor Improves Compactor Performance{5070,5058,5651,5652}
1999/06/01 Rotor Drive Chain Part Number Has Changed{3159}
1999/06/01 Installation Of Auxiliary Fuse Wiring For Additional Power Source{1417}
1999/06/01 Bolt Callout In Propel Planetary Is Incorrect{4050,4011}
1999/06/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/07 Improved Lift Cylinder Rod Now Used{5102,7120}
1999/06/07 New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release{0781,1920}
1999/06/07 Common Charcoal Gray Paint Used{7581}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.