New 153-9630 Sensor Test Group Adapter Kit For DataView Now Available{1000,3000,4000,5000,6000,0788,0785}
Usage:
All Electronically Controlled Cat®
Equipment
Warranty Category: Y
Features/Benefits
-
- * Used to test CAT® PWM and analog sensors on or off the machine
- * Used with 131-5050 DataView and DataView 2.0 software
- * DataView 2.0 software lists common sensors for easy setup
- * Internal power supply powers active sensors while removed from equipment
- * CE certified for European use
- * Used to test CAT® PWM and analog sensors on or off the machine
Specifications/Technical Information
- Input impedance - 120 k/Omega/
- Input voltage - 5 VDC (from DataView)
- Output voltage - 9.4 VDC (sensor power)
- Maximum sensor current - 40 mA maximum at 9.4 VDC
- Operating temperature - -17 to 60°C (0 to 140°F)
- Size - 85 x 56 x 35 mm (3.3 x 2.2 x 1.4 in)
- Weight (153-9625) - 0.23 kg (.5 lb)
- Input voltage - 5 VDC (from DataView)
153-9630 Test Group, Sensor
Reference
PWM/Analog Sensor Adapter Kit for DataView Tool Operating Manual; NEHS0711
Caterpillar Information System:
1999/05/24 New Frame Leveling Valve Available{5144}
1999/05/24 New Lift Cylinder Has Threaded Crown And Recess For Piston Bolt{5102}
1999/05/24 Proper Boom Pin Removal Increases Service Life And Eases Installation{6301}
1999/05/24 Decelerator Adjustment For Track-Type Tractors And Pipelayers{1276}
1999/05/24 Improved Fuel Filter For Backhoe Loaders{1260,1261}
1999/05/17 Use 156-1060 Gas And 156-1070 Gas And Diesel Engine Analyzer To Check Emissions {1088,0781}
1999/05/17 New 147-4438 Power Supply Group For Floor Model Hose Machine Now Available {0684}
1999/05/17 New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17 Sonic Feeder Retrofit Kit No Longer Available {5657}
1999/05/17 Service Brakes Check And Adjustment Procedure included In Operation And Maintenance Manual {7520,7525}
1999/05/17 Extended Engine Oil And Filter Change Intervals {1348,7528}
1999/05/17 Transmission Oil Change Interval Extended {3080,7526}
1999/05/24 New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450,0734,7002}
1999/05/24 New Main Bearing Material{1203}
1999/05/24 New DT Connector Plugs With Improved Seal Retention{1408,7553}
1999/05/24 Air Conditioner Service Tips{7320,7337}
1999/06/01 Special Instruction, REHS0377, Available For Installing Spacers On New Backhoe Loader Booms For The Fitup Of Hydraulic Lines{5057}
1999/06/01 Backhoe Loader Window Latch Rod Now Serviceable{7308}
1999/06/01 Pump And Suction Elbow Changes Improve Assembly Alignment{5084}
1999/06/01 New Boom Upper Sheave Block Improves Cable Spooling{5415}
1999/06/01 Addition Of Drainage Hole Eliminates Water Accumulation In Winch Frame{7053}
1999/06/01 Improved Counterweight Group Eases Retaining Rod Installation{7056}
1999/06/01 New Exhaust Manifold Groups (Bellows Type) Used{1059}
1999/06/01 Correction To Certain Off-Highway Truck Service Manual Modules{0374}