New 155-5175 AC Current Probe For Generator Sets Now Available{1400,4450,0734,7002}
Usage:
All Generator Sets
Warranty Category: Y
Features/Benefits
-
- * Used to measure AC current on Caterpillar® Generator Sets and any other application within its capability (see specifications)
- * Used with Caterpillar® 6V-7070 Digital Multimeter, 9U-7330 Digital Multimeter, or 146-4080 Digital Multimeter
- * Replaces 6V-4960 AC Current Probe
- * Clamp-on probe replaces standard test leads (allows current measurements without breaking circuit)
- * Extends AC current measuring ability of multimeter up to 1000 Amperes rms by use of 1000:1 current transformer
- * Measures conductors up to 54.1 mm (2.13 in) diameter
- * CE compliant
- * Used to measure AC current on Caterpillar® Generator Sets and any other application within its capability (see specifications)
Specifications/Technical Information
Current range - 0.1 to 1000A rms
Temperature range
- Operating - -10 to 50°C (14 to 122°F)
- Storage - -20 to 70°C (-4 to 158°F)
- Frequency range - 30 Hz to 5 kHz
- Temperature coefficient - .01% per 10K
- Storage - -20 to 70°C (-4 to 158°F)
Temperature coefficient - .01% per 10K
- 0.1 to 10A - 3% ±0.1A
- 10 to 50A - 1.5%
- 50 to 200A - 0.75%
- 200 to 1200A - 0.5%
- 10 to 50A - 1.5%
155-5175 AC Current Probe
Caterpillar Information System:
1999/05/24 New 153-9630 Sensor Test Group Adapter Kit For DataView Now Available{1000,3000,4000,5000,6000,0788,0785}
1999/05/24 New Frame Leveling Valve Available{5144}
1999/05/24 New Lift Cylinder Has Threaded Crown And Recess For Piston Bolt{5102}
1999/05/24 Proper Boom Pin Removal Increases Service Life And Eases Installation{6301}
1999/05/24 Decelerator Adjustment For Track-Type Tractors And Pipelayers{1276}
1999/05/24 Improved Fuel Filter For Backhoe Loaders{1260,1261}
1999/05/17 Use 156-1060 Gas And 156-1070 Gas And Diesel Engine Analyzer To Check Emissions {1088,0781}
1999/05/17 New 147-4438 Power Supply Group For Floor Model Hose Machine Now Available {0684}
1999/05/17 New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17 Sonic Feeder Retrofit Kit No Longer Available {5657}
1999/05/17 Service Brakes Check And Adjustment Procedure included In Operation And Maintenance Manual {7520,7525}
1999/05/17 Extended Engine Oil And Filter Change Intervals {1348,7528}
1999/05/24 New Main Bearing Material{1203}
1999/05/24 New DT Connector Plugs With Improved Seal Retention{1408,7553}
1999/05/24 Air Conditioner Service Tips{7320,7337}
1999/06/01 Special Instruction, REHS0377, Available For Installing Spacers On New Backhoe Loader Booms For The Fitup Of Hydraulic Lines{5057}
1999/06/01 Backhoe Loader Window Latch Rod Now Serviceable{7308}
1999/06/01 Pump And Suction Elbow Changes Improve Assembly Alignment{5084}
1999/06/01 New Boom Upper Sheave Block Improves Cable Spooling{5415}
1999/06/01 Addition Of Drainage Hole Eliminates Water Accumulation In Winch Frame{7053}
1999/06/01 Improved Counterweight Group Eases Retaining Rod Installation{7056}
1999/06/01 New Exhaust Manifold Groups (Bellows Type) Used{1059}
1999/06/01 Correction To Certain Off-Highway Truck Service Manual Modules{0374}
1999/06/01 Correction To Special Instruction REHS0263; 785C Off-Highway Truck Assembly Procedure{0374,7960}