1998/11/16 Caterpillar


New Manifold In Hoist Lines Eliminates False Actuation Of VIMS (Vital Information Monitoring System){7601}

Usage:


784B (5RK),
785 (8GB),
785B (6HK),
785C (1HW, 5AZ) 789 (9ZC),
789B (7EK) 789C (2BW) 793 (3SJ),
793B (1HL),
793C (4AR, 4GZ) Off-Highway Trucks

New 158-3403 Manifold (1) replaces former 6E-2308 and 134-3017 Manifolds in the hoist Lines, shown in Illustration 1.

New 158-3403 Manifold (1) includes a differential pressure switch to send a signal to the VIMS (Vital Information Monitoring System) when screens in the hoist lines are plugged. Pressure and flow surges in former 6E-2308 and 134-3017 Manifolds caused a false plugged screen signal to Vims.

167-0566 Cartridge (12) and 167-0567 Orifice (13), in new 158-3403 Manifold, dampen pressure and flow surges to eliminate false signals. See Illustration 2 and chart for service parts.


Illustration 1.
Hoist Lines.

(A) Top View.
(B) Side View.
(1) New 158-3403 Manifold.
(


Illustration 2.
New 158-3403 Manifold.

Caterpillar Information System:

1998/11/16 New Hoist And Brake Cooling Pumps Are Now Available For Certain Off-Highway Trucks{5083}
1998/11/16 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks{3187,3030}
1998/11/16 Certain Off-Highway Trucks Shipping With Dry Batteries{1401}
1998/11/16 Torque Converter Lockup Clutch Rebuild{3100,3102,3136}
1998/11/16 Retaining Ring Service Kit Available For Accumulators{5077,4263}
1998/11/16 New Head For Dozer Tilt Cylinders And Change To Head For Ripper Lift Cylinder Assure Oil Flow Through Bypass In Piston. Torque Increased For Piston Nut In Dozer Tilt Cylinders{5102,5104}
1998/11/09 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/09 Orifices Removed In Propel Pump EDCs {3205}
1998/11/09 Wiring Schematic For Telehandlers {7566}
1998/11/09 Improved VIMS 100-3055 And 118-7226 Temperature Sensor Groups Now Used {7601,1408}
1998/11/09 Improved Final Drive Wheel Bearing Retainer Plate Available For Certain Off-Highway Trucks {4051,4066,4208}
1998/11/09 New Aftercooler Tube Is Available To Move Sensor Away From Exhaust Heat. {1380,1063}
1998/11/16 Lubrication And Maintenance Literature Available{0374,0375}
1998/11/16 Special Instruction, REHS0316, "Troubleshooting Guide For Engine Prelub System" Available{0374,1319,1469}
1998/11/16 Hydraulic Electronic Control Now Serviceable{5702}
1998/11/16 Correction To Testing And Adjusting Manual, RENR3005{0374,5069,5069}
1998/11/16 Improved Throttle Cables Available For Utility Compactors{1265}
1998/11/16 Margin Pressure Increased For Piston And Vane Pump Group In Steering System{5070,4306}
1998/11/16 Auger Mounting Bolt Change{5620,5326}
1998/11/16 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available{1714}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/23 Main Drive Shaft Slip Spline Lubrication Interval Changed {3253}
1998/11/23 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear {1234,1212}
1998/11/23 Dirt Guard On Kingpin Retention Improved {4314,4305,4313}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.