Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
Usage:
All Caterpillar machines equipped with Caterpillar electronic controls that utilize CID, FMI, and MID service code information
Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", contains service code information utilized by Caterpillar machines that are equipped with Caterpillar electronic controls. Special Instruction, REHS0126-02 provides information on component identifiers, failure mode identifiers, and module identifiers.
This Special Instruction is available through normal corporate literature channels by ordering:
- * ixREHS0126, "Caterpillar Electronic Controls Service Code Information Description List."
Caterpillar Information System:
1998/11/16 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available{1714}
1998/11/16 Auger Mounting Bolt Change{5620,5326}
1998/11/16 Margin Pressure Increased For Piston And Vane Pump Group In Steering System{5070,4306}
1998/11/16 Improved Throttle Cables Available For Utility Compactors{1265}
1998/11/16 Correction To Testing And Adjusting Manual, RENR3005{0374,5069,5069}
1998/11/16 Hydraulic Electronic Control Now Serviceable{5702}
1998/11/16 Special Instruction, REHS0316, "Troubleshooting Guide For Engine Prelub System" Available{0374,1319,1469}
1998/11/16 Lubrication And Maintenance Literature Available{0374,0375}
1998/11/16 New Manifold In Hoist Lines Eliminates False Actuation Of VIMS (Vital Information Monitoring System){7601}
1998/11/16 New Hoist And Brake Cooling Pumps Are Now Available For Certain Off-Highway Trucks{5083}
1998/11/16 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks{3187,3030}
1998/11/16 Certain Off-Highway Trucks Shipping With Dry Batteries{1401}
1998/11/23 Main Drive Shaft Slip Spline Lubrication Interval Changed {3253}
1998/11/23 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear {1234,1212}
1998/11/23 Dirt Guard On Kingpin Retention Improved {4314,4305,4313}
1998/11/23 Fan Drive Grease Fitting Relocated {7510}
1998/11/23 Supplement For Specification Manual On "Adjustment Procedure For The Bevel Gear Group" {3256,3258}
1998/11/23 Change In Location And Size Of Crankshaft Counterweight Sequence Number {1231,1202}
1998/11/23 Preventing Ether Line From Rubbing Against Other Components {1456}
1998/11/23 Correct Positioning Of Shims On Dump Body Installation {7258}
1998/11/23 Improved Compressor Group Ring Kit {1803}
1998/11/23 Cable Carrier From Operator's Station To Platform Is Now Available {1408}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}