Correct Positioning Of Shims On Dump Body Installation {7258}
Usage:
D25D (1HK),
D30D (3AJ),
D250E (5TN),
D300E (7FN),
D350E (9LR),
D400E (2YR) Articulated Trucks
Reference: Special Instruction SEHS9983; October 2, 1996; "Installation and Adjustment of Truck Body".
Reference: Special Instruction REHS0018; October 31, 1996; "Installation and Adjustment of Truck Body".
This article clarifies the positioning of the 5U-0297 Shims in the various truck body groups. The shims should be fit as required and installed only at the time two locations indicated in the illustration. The shims should be divided evenly between the two sides. This allows minimum body side float.
Typical truck body group. Arrows indicated correct position of evenly divided shims.
Caterpillar Information System:
1998/11/23 Preventing Ether Line From Rubbing Against Other Components {1456}
1998/11/23 Change In Location And Size Of Crankshaft Counterweight Sequence Number {1231,1202}
1998/11/23 Supplement For Specification Manual On "Adjustment Procedure For The Bevel Gear Group" {3256,3258}
1998/11/23 Fan Drive Grease Fitting Relocated {7510}
1998/11/23 Dirt Guard On Kingpin Retention Improved {4314,4305,4313}
1998/11/23 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear {1234,1212}
1998/11/23 Main Drive Shaft Slip Spline Lubrication Interval Changed {3253}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available{1714}
1998/11/16 Auger Mounting Bolt Change{5620,5326}
1998/11/16 Margin Pressure Increased For Piston And Vane Pump Group In Steering System{5070,4306}
1998/11/16 Improved Throttle Cables Available For Utility Compactors{1265}
1998/11/23 Improved Compressor Group Ring Kit {1803}
1998/11/23 Cable Carrier From Operator's Station To Platform Is Now Available {1408}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}
1998/11/30 Final Drive Duo-Cone Ring Seals Improved {4052,4050}
1998/11/30 Proper Flushing And Charging Of Air Conditioner Refrigerant System {7320}
1998/11/30 Engine Cylinder Head Exhaust Port Thermocouples No Longer Available On Remanufactured 3500 With Electronic Unit Injection (EUI) And 3500B Engines {7498}
1998/12/07 Special Instruction, REHS0103, "Dynamometer Test For The Power Take-Off" Available {3107}
1998/12/07 New Pressurizer Group Yields Quieter Cab {7329,1061}