Cable Carrier From Operator's Station To Platform Is Now Available {1408}
Usage:
AP-1055B (8BM) AP-1055B (ABB),
AP-1050B (6ZN),
BG-2455C (6TN),
BG-2455C (ACM),
BG-245C (4XN) Asphalt Pavers
The 113-8488 Cable Carrier from the operator's station to the platform is now available as a separate part. Formally, this part was included as part of the 133-6088 Harness Assembly. In order to insert the 133-6088 Harness Assembly into the 113-8488 Cable Carrier some of the deutz connectors will need to be removed and reattached after the harness has been inserted.
Caterpillar Information System:
1998/11/23 Improved Compressor Group Ring Kit {1803}
1998/11/23 Correct Positioning Of Shims On Dump Body Installation {7258}
1998/11/23 Preventing Ether Line From Rubbing Against Other Components {1456}
1998/11/23 Change In Location And Size Of Crankshaft Counterweight Sequence Number {1231,1202}
1998/11/23 Supplement For Specification Manual On "Adjustment Procedure For The Bevel Gear Group" {3256,3258}
1998/11/23 Fan Drive Grease Fitting Relocated {7510}
1998/11/23 Dirt Guard On Kingpin Retention Improved {4314,4305,4313}
1998/11/23 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear {1234,1212}
1998/11/23 Main Drive Shaft Slip Spline Lubrication Interval Changed {3253}
1998/11/16 Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16 Compensator And Socket Head Bolts For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Pump Now Available{1714}
1998/11/16 Auger Mounting Bolt Change{5620,5326}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}
1998/11/30 Final Drive Duo-Cone Ring Seals Improved {4052,4050}
1998/11/30 Proper Flushing And Charging Of Air Conditioner Refrigerant System {7320}
1998/11/30 Engine Cylinder Head Exhaust Port Thermocouples No Longer Available On Remanufactured 3500 With Electronic Unit Injection (EUI) And 3500B Engines {7498}
1998/12/07 Special Instruction, REHS0103, "Dynamometer Test For The Power Take-Off" Available {3107}
1998/12/07 New Pressurizer Group Yields Quieter Cab {7329,1061}
1998/12/07 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/12/07 Proper Adjustment Guidelines For Winch Control Linkages {5161}