Special Instruction, REHS0103, "Dynamometer Test For The Power Take-Off" Available {3107}
Usage:
Challenger 35 (8DN),
Challenger 45 (1DR),
Challenger 55 (7DM) Agricultural Tractors
- SUPPLEMENT: JANUARY 25, 1999
Service Magazine SEPD0447, Article 4, Page 2, December 7, 1998; "Special Instruction, REHS0103, 'Dynamometer Test For The Power Take-Off' Available".
Disregard this article and see Service Magazine SEPD0453, Article 4, Page 2 with the same title.
--------------- END SUPPLEMENT ---------------
The Special Instruction, REHS0103, "Procedure To Install The 135-7462 Steering Control Valve" is available. This special instruction provides the information that is necessary in order to correctly test and calculate engine power using the power take-off.
Special Instruction, REHS0103, is available through normal literature channels.
Caterpillar Information System:
1998/11/30 Engine Cylinder Head Exhaust Port Thermocouples No Longer Available On Remanufactured 3500 With Electronic Unit Injection (EUI) And 3500B Engines {7498}
1998/11/30 Proper Flushing And Charging Of Air Conditioner Refrigerant System {7320}
1998/11/30 Final Drive Duo-Cone Ring Seals Improved {4052,4050}
1998/11/23 Use 154-9740 Wire Connector Rework Kit For Solid Cable To Component Connections {1408}
1998/11/23 Use 153-8538 Refrigerant Solvent For Air Conditioner Refrigerant Flushing Units {0708}
1998/11/23 Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23 Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23 Cable Carrier From Operator's Station To Platform Is Now Available {1408}
1998/11/23 Improved Compressor Group Ring Kit {1803}
1998/11/23 Correct Positioning Of Shims On Dump Body Installation {7258}
1998/11/23 Preventing Ether Line From Rubbing Against Other Components {1456}
1998/12/07 New Pressurizer Group Yields Quieter Cab {7329,1061}
1998/12/07 Cooling System Thermostat To Be Replaced At 6,000 Hours {1355}
1998/12/07 Proper Adjustment Guidelines For Winch Control Linkages {5161}
1998/12/07 Turbocharger Exhaust Tubes Now Boxed To Prevent Water Accumulation In Turbocharger During Shipment {1061,1062}
1998/12/07 D&A Tooling Used On Certain Variable Speed Fan Clutch Assemblies Can Be Used On New Fan Clutch Assembly {0700,0714,1356}
1998/12/07 Prevention Of Cracking Of 125-6961 A-Frame Support Assembly {7050}
1998/12/07 Improved Clamps Eliminate Suction Line Leaks {5057,7554}
1998/12/07 Procedure Available To Improve Service Life Of 7U-6300 Expansion Tank Group {1354,1350}
1998/12/07 Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07 Tire Pressure On Rubber Tire Pavers {4203}
1998/12/07 New Remanufactured Water Pump Groups Available {1361}
1998/12/07 Identification Of External Terminals On Alternators {1405,1406,1400}