1998/11/09 Caterpillar


Wiring Schematic For Telehandlers {7566}

Usage:


TH62 (3LN, 4TM) TH63 (3NN, 5WM) TH82 (3JN, 3KN) TH83 (3RN) TH103 (3PN) Telehandlers

The wire schematic for the Telehandler follows in the next several pages. The schematic was cut in four sections. The drawings are overlapped to ease assembly. This should be inserted into Service Manual SENR5835 TH62, TH63, TH82, & TH83 Telehandlers and SENR1230 TH103 Telehandler until an official schematic is developed.


Illustration 1.
Telehandler Wire Schematic Section 1.


Illustration 1.
Telehandler Wire Schematic Section 2.


Illustration 1.
Telehandler Wire Schematic Section 3.


Illustration 1.
Telehandler Wire Schematic Section 4.

Caterpillar Information System:

1998/11/09 Improved VIMS 100-3055 And 118-7226 Temperature Sensor Groups Now Used {7601,1408}
1998/11/09 Improved Final Drive Wheel Bearing Retainer Plate Available For Certain Off-Highway Trucks {4051,4066,4208}
1998/11/09 New Aftercooler Tube Is Available To Move Sensor Away From Exhaust Heat. {1380,1063}
1998/11/09 Turbocharger Exhaust Tubes Now Boxed To Prevent Water Accumulation In Turbocharger During Shipment {1061,1062}
1998/11/09 New Second Reduction Final Drive Planetary Bearing Available For Certain Off-Highway Trucks {4050,7551}
1998/11/09 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/09 Battery Cable Clipping Improved {1402,7263}
1998/11/02 Improved Test Of Charging System{1406}
1998/11/02 Improved Cab Wiring Harness Available For The 928G & IT28G {1408}
1998/11/02 Improving Performance Of Air Conditioning Systems On Small Wheel Loaders{7320}
1998/11/02 Improved Defroster In Rear Window Increases Service Life{7310}
1998/11/02 New Service Tools For Installation And Service Of Jacobs Vehicle Systems (Jake Brake®){1129}
1998/11/09 Orifices Removed In Propel Pump EDCs {3205}
1998/11/09 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/16 New Head For Dozer Tilt Cylinders And Change To Head For Ripper Lift Cylinder Assure Oil Flow Through Bypass In Piston. Torque Increased For Piston Nut In Dozer Tilt Cylinders{5102,5104}
1998/11/16 Retaining Ring Service Kit Available For Accumulators{5077,4263}
1998/11/16 Torque Converter Lockup Clutch Rebuild{3100,3102,3136}
1998/11/16 Certain Off-Highway Trucks Shipping With Dry Batteries{1401}
1998/11/16 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks{3187,3030}
1998/11/16 New Hoist And Brake Cooling Pumps Are Now Available For Certain Off-Highway Trucks{5083}
1998/11/16 New Manifold In Hoist Lines Eliminates False Actuation Of VIMS (Vital Information Monitoring System){7601}
1998/11/16 Lubrication And Maintenance Literature Available{0374,0375}
1998/11/16 Special Instruction, REHS0316, "Troubleshooting Guide For Engine Prelub System" Available{0374,1319,1469}
1998/11/16 Hydraulic Electronic Control Now Serviceable{5702}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.