1998/11/09 Caterpillar


New Second Reduction Final Drive Planetary Bearing Available For Certain Off-Highway Trucks {4050,7551}

Usage:


784B (5RK) Tractor, 785B (6HK),
785C (5AZ),
789B (7EK) Off-Highway Trucks

SUPPLEMENT: JANUARY 25, 1999

Service Magazine SEPD0442, Article 4, Page 4, November 9, 1998; "New Second Reduction Final Drive Planetary Bearing Available For Certain Off-Highway Trucks".

Disregard this article and refer to Service Magazine SEPD0453, Article 20, Page 11 with the same title.

--------------- END SUPPLEMENT ---------------

Description of Change: A new second reduction final drive planetary bearing assembly is available with an improved surface finish to increase service life. The 151-7099 Bearing Assembly is a direct replacement for the 113-7921 Bearing Assembly.

Adaptable To: The 151-7099 Bearing Assembly is effective with 784B (5RK26), 785B (6HK847), 785C (5AZ0001), and 789B (7EK664). Adaptable to all trucks which previously used the 113-7921 Bearing Assembly.

Caterpillar Information System:

1998/11/09 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/09 Battery Cable Clipping Improved {1402,7263}
1998/11/02 Improved Test Of Charging System{1406}
1998/11/02 Improved Cab Wiring Harness Available For The 928G & IT28G {1408}
1998/11/02 Improving Performance Of Air Conditioning Systems On Small Wheel Loaders{7320}
1998/11/02 Improved Defroster In Rear Window Increases Service Life{7310}
1998/11/02 New Service Tools For Installation And Service Of Jacobs Vehicle Systems (Jake Brake®){1129}
1998/11/02 Correction To SEBP8506-03 Parts Manual (GAH){1201}
1998/11/02 New Muffler Used{1062}
1998/11/02 New Muffler Bracket{1062}
1998/11/02 Correction To Service Manual For Connecting Rod Bolt Torque{1218}
1998/11/02 New Torque Turn 7000 Hydraulic Wrench For Undercarriage Equipment - Use 149-9947 (208 Volt), 149-9949 (220 Volt), 149-9950 (375 Volt), 149-9951 (440 Volt), Or 149-9952 (575 Volt) - All 50/60 Hz, 3 Phase{4170}
1998/11/09 Turbocharger Exhaust Tubes Now Boxed To Prevent Water Accumulation In Turbocharger During Shipment {1061,1062}
1998/11/09 New Aftercooler Tube Is Available To Move Sensor Away From Exhaust Heat. {1380,1063}
1998/11/09 Improved Final Drive Wheel Bearing Retainer Plate Available For Certain Off-Highway Trucks {4051,4066,4208}
1998/11/09 Improved VIMS 100-3055 And 118-7226 Temperature Sensor Groups Now Used {7601,1408}
1998/11/09 Wiring Schematic For Telehandlers {7566}
1998/11/09 Orifices Removed In Propel Pump EDCs {3205}
1998/11/09 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/16 New Head For Dozer Tilt Cylinders And Change To Head For Ripper Lift Cylinder Assure Oil Flow Through Bypass In Piston. Torque Increased For Piston Nut In Dozer Tilt Cylinders{5102,5104}
1998/11/16 Retaining Ring Service Kit Available For Accumulators{5077,4263}
1998/11/16 Torque Converter Lockup Clutch Rebuild{3100,3102,3136}
1998/11/16 Certain Off-Highway Trucks Shipping With Dry Batteries{1401}
1998/11/16 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks{3187,3030}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.