Battery Cable Clipping Improved {1402,7263}
Usage:
120H (4MK, 2AN, 9YR) 135H (3YK, 8WN) Motor Graders
Description of Change: An additional clip has been added for the battery cable. This clip helps prevent the battery cable from contacting the air conditioner belt.
The change to the 144-5724 Dash Assembly is effective with 120H (4MK554, 2AN134, 9YR375) and 135H (3YK336, 8WN540) Motor Graders and is adaptable to earlier machines by adding a 5V-7003 Boss, a 5M-3062 Bolt, an 8T-4896 Washer and a 9M-8406 Clip. The illustration gives the dimensions for adding the boss.
144-5724 Dash Assembly. Dimension A = 332 mm (13.1 inch)
Caterpillar Information System:
1998/11/02 Improved Test Of Charging System{1406}
1998/11/02 Improved Cab Wiring Harness Available For The 928G & IT28G {1408}
1998/11/02 Improving Performance Of Air Conditioning Systems On Small Wheel Loaders{7320}
1998/11/02 Improved Defroster In Rear Window Increases Service Life{7310}
1998/11/02 New Service Tools For Installation And Service Of Jacobs Vehicle Systems (Jake Brake®){1129}
1998/11/02 Correction To SEBP8506-03 Parts Manual (GAH){1201}
1998/11/02 New Muffler Used{1062}
1998/11/02 New Muffler Bracket{1062}
1998/11/02 Correction To Service Manual For Connecting Rod Bolt Torque{1218}
1998/11/02 New Torque Turn 7000 Hydraulic Wrench For Undercarriage Equipment - Use 149-9947 (208 Volt), 149-9949 (220 Volt), 149-9950 (375 Volt), 149-9951 (440 Volt), Or 149-9952 (575 Volt) - All 50/60 Hz, 3 Phase{4170}
1998/10/26 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available{4450}
1998/10/26 Maintenance Free Hubs{6331}
1998/11/09 Water Pump Gasket For Emissions Engines Not Clearly Identified In Parts Manual {1361}
1998/11/09 New Second Reduction Final Drive Planetary Bearing Available For Certain Off-Highway Trucks {4050,7551}
1998/11/09 Turbocharger Exhaust Tubes Now Boxed To Prevent Water Accumulation In Turbocharger During Shipment {1061,1062}
1998/11/09 New Aftercooler Tube Is Available To Move Sensor Away From Exhaust Heat. {1380,1063}
1998/11/09 Improved Final Drive Wheel Bearing Retainer Plate Available For Certain Off-Highway Trucks {4051,4066,4208}
1998/11/09 Improved VIMS 100-3055 And 118-7226 Temperature Sensor Groups Now Used {7601,1408}
1998/11/09 Wiring Schematic For Telehandlers {7566}
1998/11/09 Orifices Removed In Propel Pump EDCs {3205}
1998/11/09 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
1998/11/16 New Head For Dozer Tilt Cylinders And Change To Head For Ripper Lift Cylinder Assure Oil Flow Through Bypass In Piston. Torque Increased For Piston Nut In Dozer Tilt Cylinders{5102,5104}
1998/11/16 Retaining Ring Service Kit Available For Accumulators{5077,4263}
1998/11/16 Torque Converter Lockup Clutch Rebuild{3100,3102,3136}