768C TRACTOR & 769C TRUCK POWER TRAIN Caterpillar

NOTE: The body support (FT1437) can be installed on either frame rail.

1. Lift the truck body, and put body support (FT1437) (1) in position on the frame rail as shown. Install the two bolts that hold the body support to the frame rail.

2. Lower the body on to the body support.

3. Remove nut (2), and disconnect hoist control rod (3) from lever (4). This will prevent an operator from trying to lower the body while the body support is holding the body in an up position.

Remove Body Support (FT1437)

1. Connect hoist control rod (1) to lever (3), and install nut (2).

2. Lift the truck body off of the body support (FT1437).

3. Remove the bolts that fasten body support (4) to the frame rail, and remove the body support.

4. Lower the truck body.