768C TRACTOR & 769C TRUCK POWER TRAIN Caterpillar

Start By:

a. install body retaining pins

1. Disconnect hose (2) from torque converter inlet relief valve (1). Remove the O-ring seal from the hose.

2. Remove three bolts (3) and torque converter inlet relief valve (1). Remove the O-ring seals from the valve.

NOTE: The following steps are for installation of the torque converter inlet relief valve.

3. Put the two O-ring seals in position on torque converter inlet relief valve (1). Put the valve in position on the torque converter, and install three bolts (3).

4. Put the O-ring seal in position in the end of hose (2), and connect the hose to the torque converter inlet relief valve.

End By:

a. remove body retaining pins