Remanufactured Fuel Pump And Governor Groups{1251,1264}
Usage:
3306 Engines
Remanufactured fuel pump and governor groups are now available for 3306 Engines. The use of these remanufactured groups will lower replacement costs. Remember the remanufactured fuel pump and governor groups have the same warranty as new fuel pump and governor groups.
Caterpillar Information System:
1983/10/17 New Pump Drive Gear And Shaft Have More Clearance{3101,3108}
1983/10/17 New Rod Ends And Supports Used In Hydraulic Control Groups{5452}
1983/10/17 Use Shims At Both Ends Of Housing Assembly To Prevent Oil Leakage From Power Control Group{5201}
1983/10/17 If The Cab Door Is Difficult To Open, Check Nylon Washer For Damage{7308}
1983/10/17 Changes To Torque Converter Inlet Relief Valve Increase Service Life{3167}
1983/10/17 Stronger Spider Assemblies Used In Fan Groups{1356}
1983/10/17 Modification Of Control Panel Gives Different Power Source For Overcrank Timer To Prevent Starter Motor Failures{7450}
1983/10/17 Instrument Panel Changed To Give Better Fit For Gauges{7451}
1983/10/17 New Rod And Seal Used To Prevent Oil Leakage Into The Transmission Neutralizer Group{3181}
1983/10/17 Installation Of Vent Assembly Helps Prevent Oil Leakage In The Wheel Leaning Mechanism{5224}
1983/10/17 Fan Drive Conversion Group Available To Change Fans From Gear Driven To Belt Driven{1359,1356}
1983/10/17 Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17 Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/24 FT1782 Turbocharger Test Stand Available{0651,1052}
1983/10/24 Changes To Track Motor Guard Improve Protection{7163}
1983/10/31 Clean and Protect Split Master Links During Track Reconditioning{4176}
1983/10/31 Install Seal Correctly In Wheel Leaning Mechanism To Prevent Leakage{5224}
1983/10/31 Additional Remanufactured Water Pumps Available{1361}
1983/10/31 New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31 Radiators With New Design Must Be Assembled With Thin Support Plate At The Top{1353}
1983/11/07 Correct Procedure To Start The Engine Will Help Prevent Damage To The Transmission{1424}
1983/11/07 Use 6V6070 Tool Group And New Adjustment Procedure For New Scroll Fuel System{0654,1264,1278}
1983/11/07 Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/14 Use Thread Lubricant When Wheels Are Installed{4202,4205}