New Rod And Seal Used To Prevent Oil Leakage Into The Transmission Neutralizer Group{3181}
Usage:
950B, 966D, 980C Loaders;
814B, 824C Tractors;
815B, 816B, 825C, 826C Compactors
Description of Change: A new rod and seal are used in the transmission neutralizer group on the above machines. The new rod and seal will help prevent transmission oil leakage into the neutralizer group. Formerly, there could be some leakage between the housing and the rod.
Adaptable As: The new 9V6374 Rod is a direct replacement for the former 7V4393 Rod, which is canceled. A 9V6375 Seal must be used with the new rod.
Caterpillar Information System:
1983/10/17 Installation Of Vent Assembly Helps Prevent Oil Leakage In The Wheel Leaning Mechanism{5224}
1983/10/17 Fan Drive Conversion Group Available To Change Fans From Gear Driven To Belt Driven{1359,1356}
1983/10/17 Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/10 Cab Head Lamps Mounted In New Location For Better Protection{7309}
1983/10/10 New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10 New Service Centers For 6V3100 Engine Timing Indicator Group{0651}
1983/10/10 New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10 S.O.S Program Synopsis{1318,5068,3179,0652}
1983/10/03 Use 6V6070 Tool Group And New Adjustment Procedure For New Scroll Fuel System{0654,1264,1278}
1983/09/26 New Seals Used In Tandem Drive Group{4064,4062,4071}
1983/09/26 Clearance Between Boom And Upper Frame{6501}
1983/09/26 New Drawbar And Yoke Assemblies Have Stronger Cross Bar To Prevent Damage{6153}
1983/10/17 Instrument Panel Changed To Give Better Fit For Gauges{7451}
1983/10/17 Modification Of Control Panel Gives Different Power Source For Overcrank Timer To Prevent Starter Motor Failures{7450}
1983/10/17 Stronger Spider Assemblies Used In Fan Groups{1356}
1983/10/17 Changes To Torque Converter Inlet Relief Valve Increase Service Life{3167}
1983/10/17 If The Cab Door Is Difficult To Open, Check Nylon Washer For Damage{7308}
1983/10/17 Use Shims At Both Ends Of Housing Assembly To Prevent Oil Leakage From Power Control Group{5201}
1983/10/17 New Rod Ends And Supports Used In Hydraulic Control Groups{5452}
1983/10/17 New Pump Drive Gear And Shaft Have More Clearance{3101,3108}
1983/10/17 Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17 Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/24 FT1782 Turbocharger Test Stand Available{0651,1052}
1983/10/24 Changes To Track Motor Guard Improve Protection{7163}