New Injector Hold Down Clamps Are Used for Certain C175 Locomotive Engines {1251, 1290}
- Engine
- C175-20 (S/N: R4F1-120)
Description Of Change: New injector hold down clamps are used to help prevent combustion leaks into the injector sleeve area.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
| |
| Illustration 1 | g06263391 |
|
(1) Previous (2) New (3) Area of interference (M1) (M2) | |
Table 1 contains the new part numbers for this change.
Show/hide table
| New Part Number | Part Name | Previous Part Number | Qty |
|---|---|---|---|
| Injector Clamps | 20 |
Caterpillar Information System:
New Instruction for Tightening Fuel Cooler Hose is Now Available for Certain C15 and C18 Engines {1353, 1712} New Instruction for Tightening Fuel Cooler Hose is Now Available for Certain C15 and C18 Engines {1353, 1712}
New Engine Software is Now Used for Certain C175 Locomotive Engines {1920} New Engine Software is Now Used for Certain C175 Locomotive Engines {1920}
XQP1100 Generator Set Generator Operation
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Pump Control
G3516 TA Engine Engine Timing Actuator - Test
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operator Controls
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467} A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
C280-16 Marine Engines Ordering Replacement Parts
New Oil Cooler Components Are Now Used for Certain G3500 Series Engines {1378} New Oil Cooler Components Are Now Used for Certain G3500 Series Engines {1378}
An Audible Knock Is Heard on Certain 3500 Dynamic Gas Blending Engines {1278, 1280, 1741} An Audible Knock Is Heard on Certain 3500 Dynamic Gas Blending Engines {1278, 1280, 1741}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Blade Operation
New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053} New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Seat
Update on Plastic Plugs for Certain Cat® C13 and C15 Defra Base Generator Sets {1273} Update on Plastic Plugs for Certain Cat® C13 and C15 Defra Base Generator Sets {1273}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403} New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
New Engine Software Are Now Used for Certain C27 and C32 Engines {1920} New Engine Software Are Now Used for Certain C27 and C32 Engines {1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Alternate Exit
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Mounting and Dismounting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Parking
C7.1 Marine Propulsion Engine Flywheel Housing - Remove and Install
C9.3B Engines Manifold (Diesel Exhaust Fluid)
3516C Petroleum Engine Fuel System - Prime
C32 XQP1100 Generator Sets Diagnostic Trouble Codes
G3516 Petroleum Engines Aftercooler - Disassemble