New Engine Software Are Now Used for Certain C27 and C32 Engines {1920}
- Electric Power Generation
- C27 PET GEN SET (S/N: R8W1-118)
- Engine
- 3512B (S/N: ZAG1-131)
- Generator Set
- C27 GEN SET (S/N: 2A31-331; DWB1-3545; GDS1-1066)
- C32 (S/N: XMJ1-104; PHT1-153)
- C32 GEN SET (S/N: AL61-251; K7C1-986; NRC1-538; SXC1-92020; JSJ1-92001; JAZ1-4190)
- C32 (S/N: XMJ1-104; PHT1-153)
- Industrial Engine
- C27 (S/N: AT41-266)
- C27 INDUSTRIAL (S/N: RAM1-308; TWM1-82002)
- C32 INDUSTRIAL (S/N: TLD1-83001)
- C27 INDUSTRIAL (S/N: RAM1-308; TWM1-82002)
- Petroleum Engine
- C32 PETROLEUM (S/N: B2C1-354; SMP1-317)
- Petroleum Power Train Package
- C27 KNOCKDOWN K (S/N: 1271-9)
- C32 KNOCKDOWN K (S/N: 1321-27)
- C32 PET GENSET (S/N: PEF1-156; PEK1-114)
- TH48-E70-C27I (S/N: PKZ1-1)
- TH48-E70-C32I (S/N: PKY1-184)
- TH48-E70-C32P (S/N: PKG1-154)
- C32 KNOCKDOWN K (S/N: 1321-27)
- Power Module
- C32 POWER MODUL (S/N: MED1-196; KNM1-299)
- Track-Type Tractor
- SALES1A (S/N: NEW1-167)
Description Of Change: The new engine software that are used have multiple resolutions for Electric Power and Industrial engine applications.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The updates for the Electrical Power applications are listed below:
- Electronic Control Module (ECM) power supply strategy
- Camshaft/crankshaft timing range
- Camshaft/crankshaft timing range
- Enable Petroleum Droop feature
- EEC1 and EEC2 response rates
- FLS/FTS range
Show/hide table
New Software Part Number | Part Name | Previous Software Part Number |
---|---|---|
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software | ||
Engine Software |
Caterpillar Information System:
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403} New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
Update on Plastic Plugs for Certain Cat® C13 and C15 Defra Base Generator Sets {1273} Update on Plastic Plugs for Certain Cat® C13 and C15 Defra Base Generator Sets {1273}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Seat
New Injector Hold Down Clamps Are Used for Certain C175 Locomotive Engines {1251, 1290} New Injector Hold Down Clamps Are Used for Certain C175 Locomotive Engines {1251, 1290}
New Instruction for Tightening Fuel Cooler Hose is Now Available for Certain C15 and C18 Engines {1353, 1712} New Instruction for Tightening Fuel Cooler Hose is Now Available for Certain C15 and C18 Engines {1353, 1712}
New Engine Software is Now Used for Certain C175 Locomotive Engines {1920} New Engine Software is Now Used for Certain C175 Locomotive Engines {1920}
XQP1100 Generator Set Generator Operation
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Pump Control
G3516 TA Engine Engine Timing Actuator - Test
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operator Controls
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467} A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
C280-16 Marine Engines Ordering Replacement Parts
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Alternate Exit
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Mounting and Dismounting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Parking
C7.1 Marine Propulsion Engine Flywheel Housing - Remove and Install
C9.3B Engines Manifold (Diesel Exhaust Fluid)
3516C Petroleum Engine Fuel System - Prime
C32 XQP1100 Generator Sets Diagnostic Trouble Codes
G3516 Petroleum Engines Aftercooler - Disassemble
G3516 Petroleum Engines Aftercooler - Assemble
C7.1 Marine Propulsion Engine Valve Mechanism Cover - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Steering) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Steering) - Assemble