- Electric Power Generation
- C13GENSET (S/N: CE31-114; NH31-1205; DH41-2035)
- Generator Set
- C15 GEN SET (S/N: CE51-136; LNA1-2982; LXJ1-3767)
Description Of Change: Update on plastic plugs for certain Cat® C13 and C15 defra base Generator Sets. The plastic plugs can be replaced by the available metal plugs which might not be shipped along with the Generators Sets with defra base.
Adaptable To: The update for replacing the plastic plugs using metal plugs is adaptable to the Generator Sets within the listed serial numbers, and is effective with all Generator Sets after the listed serial numbers.
The required parts are listed in Table 1.
Item | Qty | Part Number | Description |
---|---|---|---|
1 | 3 | Plug | |
2 | 1 | Plug | |
3 | 1 | Plug |
Refer to the below information for the locations to install the plugs:
Illustration 1 | g06263611 |
(1) |
Illustration 2 | g06263621 |
Location for installing the plugs |
Illustration 2 shows the location to install the plugs (1). These plugs prevent any liquid on the top plate from entering into the bund area.
Note: These plugs are optional, if the customer does not require these plugs do not install the plug.
Illustration 3 | g06263625 |
(2) |
Illustration 4 | g06263913 |
Location for installing the plug |
Illustration 4 shows the location to install the plug (2). The location is on the side wall of the base to the left-hand side from the radiator end, just before the base lifting lug.
Illustration 5 | g06263918 |
(3) |
Illustration 6 | g06263920 |
Location 1 |
Illustration 7 | g06263926 |
Location 2 |
This plug can be mounted in two locations depending on where the other plug from the factory has installed. Illustration 6 and Illustration 7 shows the two possible location to install the plug (3).