336 Excavator Machine Systems Caterpillar


Refrigerant Receiver-Dryer - Remove and Install

Usage:

336 DKS

拆卸步骤

参考: 专门说明书, "目视维修步骤 - 颜色和符号" , M0066576。

------ WARNING! ------

接触制冷剂会使人受伤。

接触制冷剂会造成冻伤。 让手、脸避开,有助于防止受伤。

制冷管路被打开时,即使压力计显示系统中已经没有制冷剂,也要始终戴着护目镜。

拆卸管件时,务必小心谨慎。 慢慢地拧松接头。 如果系统内仍有压力,就要把它缓慢地释放到一个通风良好的地方去。

通过燃着的香烟吸入制冷剂会使人受伤或死亡。

通过燃着的香烟或其他抽烟方法吸入空调制冷气体,或者,吸入空调制冷气体接触明火而形成的烟雾,都会造成对人体的伤害 或死亡。

维修空调时,或者,在任何可能存在制冷气体的地方都不要抽烟。

采用经过认可的回收和循环利用车妥善地从空调器中取出制冷剂。


回收制冷剂。 请参阅维修手册, SENR5664, "使用 R-134a 制冷剂的所有空调和暖风系统产品",了解正确的回收和加注步骤。 有关正确的工具,请参阅专门出版物, NEDG2500, "空调工具"。



图 1g06259575


图 2g06259824
拆下 O 形密封圈


图 3g06259874

安裝

  1. 按与拆卸相反的顺序安装制冷剂干燥和储液罐。

Caterpillar Information System:

3500E Marine Engines Sound Information
Regulatory Compliance Information General Information
New Exhaust Manifold Brackets Are Now Used on Certain G3500 Engines {0635, 1061} New Exhaust Manifold Brackets Are Now Used on Certain G3500 Engines {0635, 1061}
323F LN Excavator Machine Systems Pump Control (Negative Flow) - Test
G3516 Petroleum Engines Gear Group (Rear) - Remove
XQP1100 Generator Set Configuration Parameters
New Improved Emergency Stop Switch Contact Block is Now Used on Certain Gensets {1408, 7418} New Improved Emergency Stop Switch Contact Block is Now Used on Certain Gensets {1408, 7418}
New Harness Is Now Used on Certain G3600 Engines {1408} New Harness Is Now Used on Certain G3600 Engines {1408}
New Cage Clamp Style Terminal Block on Certain G3600 A4 ECM Terminal Blocks {4460, 4490, 7426, 7451} New Cage Clamp Style Terminal Block on Certain G3600 A4 ECM Terminal Blocks {4460, 4490, 7426, 7451}
NOx Sensor Installation and Handling Procedures for Certain G3500H Series Engines {1335, 1408, 191N} NOx Sensor Installation and Handling Procedures for Certain G3500H Series Engines {1335, 1408, 191N}
G3516 TA Engine Compression
G3516 TA Engine Exhaust Bypass Valve - Wastegate
G3516 TA Engine Prelube Pump - Air
3512E and 3516E Marine Engines Turbocharger - Install
G3516 Petroleum Engines Gear Group (Rear) - Install
New Brake Software is Now Available For Certain F Series Large Off-Highway Trucks {7610, 7620} New Brake Software is Now Available For Certain F Series Large Off-Highway Trucks {7610, 7620}
G3516 Engines Camshaft Bearing Position
G3516 Engines Turbocharger
323F LN Excavator Machine Systems Gear Pump (Pilot) - Test
XQP1100 Generator Set Walk-Around Inspection
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Safety Messages
XQP1100 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace - If Equipped
A New Insulation Assembly and Wing Plates Are Now Used on Certain C175-20 Locomotive Engines {1062, 1091} A New Insulation Assembly and Wing Plates Are Now Used on Certain C175-20 Locomotive Engines {1062, 1091}
XQP1100 Generator Set Belts - Inspect/Adjust/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.