New Harness Is Now Used on Certain G3600 Engines {1408}
- Engine
- G3606 (S/N: JFE100-286,800-921)
- G3608 (S/N: XH7100-174,701-863)
- G3612 (S/N: BB2100-122,701-763)
- G3608 (S/N: XH7100-174,701-863)
Description Of Change: New harness is now used on certain G3600 engines which improves the service life of wires and connector.
Adaptable To: The following changes are adaptable to the engines within the listed serial numbers, and are effective with all engines after the listed serial numbers.
Replace the former part with the new part as listed in Table 1.
Show/hide table
Parts List | ||||
---|---|---|---|---|
Qty | New Part Number | Part Name | Former Part Number(1) | Engine Model |
1 | Sensor Harness As | G3606 | ||
1 | Sensor Harness As | G3608 | ||
1 | Engine Harness As | G3612 |
Show/hide table
(1) | The former part number listed is for reference only and may differ. |
The effective serial numbers are listed in Table 2.
Show/hide table
Effective Serial Numbers |
(S/N: JFE00922-UP) |
(S/N: XH700864-UP) |
(S/N: BB200764-UP) |
Caterpillar Information System:
New Cage Clamp Style Terminal Block on Certain G3600 A4 ECM Terminal Blocks {4460, 4490, 7426, 7451} New Cage Clamp Style Terminal Block on Certain G3600 A4 ECM Terminal Blocks {4460, 4490, 7426, 7451}
NOx Sensor Installation and Handling Procedures for Certain G3500H Series Engines {1335, 1408, 191N} NOx Sensor Installation and Handling Procedures for Certain G3500H Series Engines {1335, 1408, 191N}
G3516 TA Engine Compression
G3516 TA Engine Exhaust Bypass Valve - Wastegate
Smart Engine Management System (Smart EMS) HMI User Guide {1900, 1901, 1920, 7490, 7606, 7610, 7620, 79D0} Smart Engine Management System (Smart EMS) HMI User Guide {1900, 1901, 1920, 7490, 7606, 7610, 7620, 79D0}
G3516 TA Engine Crankshaft
C280-08 Marine Engine General Hazard Information
Installing a New Control Assembly for the Marine Monitoring System (MMS) {1900, 1901} Installing a New Control Assembly for the Marine Monitoring System (MMS) {1900, 1901}
A New Oil Cooler Available for Certain 3512C Well Service Engines {1378} A New Oil Cooler Available for Certain 3512C Well Service Engines {1378}
G3516 TA Engine Air/Fuel Ratio Control - Oxygen Feedback
Rework Procedure for New Support Bracket on Certain 374F and 390F Excavators Equipped with C18 Engines {1405, 1802} Rework Procedure for New Support Bracket on Certain 374F and 390F Excavators Equipped with C18 Engines {1405, 1802}
G3516 Petroleum Engines Oil Temperature Regulators - Remove and Install
New Improved Emergency Stop Switch Contact Block is Now Used on Certain Gensets {1408, 7418} New Improved Emergency Stop Switch Contact Block is Now Used on Certain Gensets {1408, 7418}
XQP1100 Generator Set Configuration Parameters
G3516 Petroleum Engines Gear Group (Rear) - Remove
323F LN Excavator Machine Systems Pump Control (Negative Flow) - Test
New Exhaust Manifold Brackets Are Now Used on Certain G3500 Engines {0635, 1061} New Exhaust Manifold Brackets Are Now Used on Certain G3500 Engines {0635, 1061}
Regulatory Compliance Information General Information
3500E Marine Engines Sound Information
336 Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
G3516 TA Engine Prelube Pump - Air
3512E and 3516E Marine Engines Turbocharger - Install
G3516 Petroleum Engines Gear Group (Rear) - Install
New Brake Software is Now Available For Certain F Series Large Off-Highway Trucks {7610, 7620} New Brake Software is Now Available For Certain F Series Large Off-Highway Trucks {7610, 7620}