Prelube Pump - Air
Show/hide table
| |
| Illustration 1 | g06259573 |
|
Right side engine view (1) Air supply (2) Solenoid valve controlling the pump motor (3) Prelube pump motor (4) Oil supply tube to pump (5) Prelube pump (6) Pump outlet to engine | |
The prelube pump is an option which provides lubrication for the engine prior to start-up. The service life of the engine is extended because of reduction in the opportunity of wear from the contact of dry moving parts.
The pump draws engine oil from the oil pan. The oil is pumped upward into the oil cooler. The oil circulates normally through the engine.
The prepublication pump is driven by a pneumatic motor.
The air supply to the motor is controlled by a solenoid valve.
The solenoid valve is controlled by the engine ECM.
Caterpillar Information System:
336 Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
3500E Marine Engines Sound Information
Regulatory Compliance Information General Information
New Exhaust Manifold Brackets Are Now Used on Certain G3500 Engines {0635, 1061} New Exhaust Manifold Brackets Are Now Used on Certain G3500 Engines {0635, 1061}
323F LN Excavator Machine Systems Pump Control (Negative Flow) - Test
G3516 Petroleum Engines Gear Group (Rear) - Remove
XQP1100 Generator Set Configuration Parameters
New Improved Emergency Stop Switch Contact Block is Now Used on Certain Gensets {1408, 7418} New Improved Emergency Stop Switch Contact Block is Now Used on Certain Gensets {1408, 7418}
New Harness Is Now Used on Certain G3600 Engines {1408} New Harness Is Now Used on Certain G3600 Engines {1408}
New Cage Clamp Style Terminal Block on Certain G3600 A4 ECM Terminal Blocks {4460, 4490, 7426, 7451} New Cage Clamp Style Terminal Block on Certain G3600 A4 ECM Terminal Blocks {4460, 4490, 7426, 7451}
NOx Sensor Installation and Handling Procedures for Certain G3500H Series Engines {1335, 1408, 191N} NOx Sensor Installation and Handling Procedures for Certain G3500H Series Engines {1335, 1408, 191N}
G3516 TA Engine Compression
3512E and 3516E Marine Engines Turbocharger - Install
G3516 Petroleum Engines Gear Group (Rear) - Install
New Brake Software is Now Available For Certain F Series Large Off-Highway Trucks {7610, 7620} New Brake Software is Now Available For Certain F Series Large Off-Highway Trucks {7610, 7620}
G3516 Engines Camshaft Bearing Position
G3516 Engines Turbocharger
323F LN Excavator Machine Systems Gear Pump (Pilot) - Test
XQP1100 Generator Set Walk-Around Inspection
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Safety Messages
XQP1100 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace - If Equipped
A New Insulation Assembly and Wing Plates Are Now Used on Certain C175-20 Locomotive Engines {1062, 1091} A New Insulation Assembly and Wing Plates Are Now Used on Certain C175-20 Locomotive Engines {1062, 1091}
XQP1100 Generator Set Belts - Inspect/Adjust/Replace
XQP1100 Generator Set Engine Oil Sample - Obtain