C9.3B Engines for Caterpillar Built Machines Caterpillar


Flywheel - Install

Usage:

D6 AG9

安装步骤

参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。

表 1
所需工具 
工具  零件号  零件描述  数量 
导向螺柱 M16 - 2 x 4 in 
395-1099  吊耳组件 


图 1g06189334


图 2g06189588


图 3g06189802

Caterpillar Information System:

Installation of New Cylinder Heads and Camshafts on Certain 3512E Petroleum Tier 4 Final Engines {0703, 1100, 1209, 1210} Installation of New Cylinder Heads and Camshafts on Certain 3512E Petroleum Tier 4 Final Engines {0703, 1100, 1209, 1210}
C12.9 Marine Propulsion Engine Cylinder Liner Projection - Inspect
G3516 Petroleum Engine Hoses and Clamps - Inspect/Replace
Lubrication of the Fuel Injection Pump on Certain C0.5, C0.7, C1.1, C1.5, and C2.2 Engines {1251, 1257, 1265} Lubrication of the Fuel Injection Pump on Certain C0.5, C0.7, C1.1, C1.5, and C2.2 Engines {1251, 1257, 1265}
CX38-P892 Well Servicing Transmission Transmission Hydraulic Control
320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting Diagnostic Trouble Codes
XQP1100 Generator Set Maintenance Interval Schedule - Prime
C12.9 Marine Propulsion Engine Rear Gear Group - Time
G3516 Petroleum Engine Coolant (NGEC) - Change
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Electric Retarder - Disassemble - Grid Assembly
G3516 Petroleum Engine Fuel Metering Valve - Check
C12.9 Marine Propulsion Engine Fuel System Pressure - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Aftercooler - Test
320 GC, 320 and 323 Excavator Machine Systems General Testing and Adjusting Information
320 GC, 320 and 323 Excavator Machine Systems Visual Inspection
320 GC, 320 and 323 Excavator Machine Systems Main Hydraulic Pump Air - Purge
320 GC, 320 and 323 Excavator Machine Systems Overload Warning - Set - If Equipped
320 GC, 320 and 323 Excavator Machine Systems Operational Checks
320 GC, 320 and 323 Excavator Machine Systems Automatic Travel Speed Control - Test
320 GC, 320 and 323 Excavator Machine Systems Machine Drift on a Slope - Check
320 GC, 320 and 323 Excavator Machine Systems Swing Speed and Overswing on Level Ground - Check
320 GC, 320 and 323 Excavator Machine Systems Swing Speed and Swing Drift on a Slope - Check
320 GC, 320 and 323 Excavator Machine Systems Cylinder Drift - Check - Loaded Bucket
320 GC, 320 and 323 Excavator Machine Systems Cylinder Speed - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.