G3516 Petroleum Engine Caterpillar


Fuel Metering Valve - Check

Usage:

G3516 AL7

  • 关闭燃气供给。


    注意

    保持所有零件清洁无杂质。

    杂质会造成快速磨损並縮短部件使用寿命。




    图 1g06177152

  • 从燃料计量阀进口拆下管。

  • 目视检查燃料计量阀进口处的滤网。 必要时清洁滤网。

    通常,可以用软刷和真空去除污染物。 确保没有碎屑进入燃料计量阀。

  • 将管连接到燃料计量阀进口。

  • 接通气体供给。
  • Caterpillar Information System:

    C12.9 Marine Propulsion Engine Fuel System Pressure - Test
    C9.3B Engines for Caterpillar Built Machines Flywheel - Remove
    C12.9 Marine Propulsion Engine Finding Top Center Position for No. 1 Piston
    C7.1 Marine Propulsion Engine Fuel Conservation Practices
    C12.9 Marine Propulsion Engine Fuel System - Inspect
    Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105} Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
    CX38-P892 Well Servicing Transmission Transmission Planetary
    A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102} A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102}
    G3516 Petroleum Engine Turbocharger - Inspect
    Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
    G3516 Petroleum Engine Overhaul (Top End)
    CX38-P892 Well Servicing Transmission Oil Filter (Transmission)
    795F AC and 795F AC XQ Off-Highway Truck Machine Systems Electric Retarder - Disassemble - Grid Assembly
    G3516 Petroleum Engine Coolant (NGEC) - Change
    C12.9 Marine Propulsion Engine Rear Gear Group - Time
    XQP1100 Generator Set Maintenance Interval Schedule - Prime
    320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting Diagnostic Trouble Codes
    CX38-P892 Well Servicing Transmission Transmission Hydraulic Control
    Lubrication of the Fuel Injection Pump on Certain C0.5, C0.7, C1.1, C1.5, and C2.2 Engines {1251, 1257, 1265} Lubrication of the Fuel Injection Pump on Certain C0.5, C0.7, C1.1, C1.5, and C2.2 Engines {1251, 1257, 1265}
    G3516 Petroleum Engine Hoses and Clamps - Inspect/Replace
    C12.9 Marine Propulsion Engine Cylinder Liner Projection - Inspect
    Installation of New Cylinder Heads and Camshafts on Certain 3512E Petroleum Tier 4 Final Engines {0703, 1100, 1209, 1210} Installation of New Cylinder Heads and Camshafts on Certain 3512E Petroleum Tier 4 Final Engines {0703, 1100, 1209, 1210}
    C9.3B Engines for Caterpillar Built Machines Flywheel - Install
    C175 Tier 4 Final Engines for Off-Highway Trucks Aftercooler - Test
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.