C9.3B Engines for Caterpillar Built Machines Caterpillar


Flywheel - Remove

Usage:

D6 AG9

拆卸步骤

参考: 专门说明书, "目视维修步骤 - 颜色和符号" , M0066576。

表 1
所需工具 
工具  零件号  零件描述  数量 
导向螺柱 M16 - 2 x 4 in 
395-1099  吊耳组件 


图 1g06176971


图 2g06177204


图 3g06177466

Caterpillar Information System:

C12.9 Marine Propulsion Engine Finding Top Center Position for No. 1 Piston
C7.1 Marine Propulsion Engine Fuel Conservation Practices
C12.9 Marine Propulsion Engine Fuel System - Inspect
Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105} Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
CX38-P892 Well Servicing Transmission Transmission Planetary
A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102} A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102}
G3516 Petroleum Engine Turbocharger - Inspect
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
G3516 Petroleum Engine Overhaul (Top End)
CX38-P892 Well Servicing Transmission Oil Filter (Transmission)
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C12.9 Marine Propulsion Engine Fuel System Pressure - Test
G3516 Petroleum Engine Fuel Metering Valve - Check
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Electric Retarder - Disassemble - Grid Assembly
G3516 Petroleum Engine Coolant (NGEC) - Change
C12.9 Marine Propulsion Engine Rear Gear Group - Time
XQP1100 Generator Set Maintenance Interval Schedule - Prime
320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting Diagnostic Trouble Codes
CX38-P892 Well Servicing Transmission Transmission Hydraulic Control
Lubrication of the Fuel Injection Pump on Certain C0.5, C0.7, C1.1, C1.5, and C2.2 Engines {1251, 1257, 1265} Lubrication of the Fuel Injection Pump on Certain C0.5, C0.7, C1.1, C1.5, and C2.2 Engines {1251, 1257, 1265}
G3516 Petroleum Engine Hoses and Clamps - Inspect/Replace
C12.9 Marine Propulsion Engine Cylinder Liner Projection - Inspect
Installation of New Cylinder Heads and Camshafts on Certain 3512E Petroleum Tier 4 Final Engines {0703, 1100, 1209, 1210} Installation of New Cylinder Heads and Camshafts on Certain 3512E Petroleum Tier 4 Final Engines {0703, 1100, 1209, 1210}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.