Oil Filter (Transmission)
Show/hide table
| |
| Illustration 1 | g06176765 |
|
Typical example of a CX38–P892 Petroleum Transmission (shown without integral pump drives) (1) Filter cartridge | |
The oil filter (1) for the transmission can be mounted directly on the rear of the transmission. Also, the filter base may be remotely mounted to the vehicle.
Oil flows from the transmission pump through the oil filter. This ensures that contamination is removed from the oil before the oil enters the system components.
Caterpillar Information System:
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
G3516 Petroleum Engine Overhaul (Major)
G3516 Petroleum Engine Ignition System Timing - Check/Adjust
G3516 Petroleum Engine Inlet Air System - Check
CX38-P892 Well Servicing Transmission Power Train Hydraulic System
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
Engine Oil Contains Elevated Lead (Pb) {1000, 1348} Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380} New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380}
C32 Tier 4 Final Marine Commercial Engines Data Link - Test
C27 and C32 Engine for MD6250 and MD6310 Drill Aftertreatment Identification Module - Test
New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920} New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920}
G3516 Petroleum Engine Overhaul (Top End)
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
G3516 Petroleum Engine Turbocharger - Inspect
A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102} A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102}
CX38-P892 Well Servicing Transmission Transmission Planetary
Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105} Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
C12.9 Marine Propulsion Engine Fuel System - Inspect
C7.1 Marine Propulsion Engine Fuel Conservation Practices
C12.9 Marine Propulsion Engine Finding Top Center Position for No. 1 Piston
C9.3B Engines for Caterpillar Built Machines Flywheel - Remove
C12.9 Marine Propulsion Engine Fuel System Pressure - Test
G3516 Petroleum Engine Fuel Metering Valve - Check