New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920}
- Engine
- 3512C (S/N: TTG1-330)
- 3516C (S/N: TTJ1-478)
When flashing the new multi-rating software files, the engine will default to a C- rating regardless of the purchased B, C, or D rating on the engine order.
The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Procedure
Once the new file is flashed, you will need to perform the following procedure:
- Select rating 1.
Show/hide table
Illustration 1 g06164852 - Set the rated fuel position to match the TMI FL static fuel setting found under the engine test tab.
Example: Serial Number S/N:TTG00271. The test spec should be set to 25.9(metric) as referenced in Illustration 1.
Show/hide tableTable 1 Rating 3516C HD 1800 Prop B/C/D Ratings
292-1899 Engine Ratings Electronics Gp3512C HD 1800 Prop B/C/D Ratings
292-1896 Engine Ratings Electronics GpChange Single 292-1916 292-1917 292-1910 292-1911 00 Single 311-2139 311-2140 303-5173 303-5174 01 Single 312-9048 312-9049 312-9042 312-9043 02 Single 367-7579 367-7580 367-7571 367-7572 03 Multi 432-6857 432-6858 432-6849 432-6850 04 Multi 487-0419 487-0420 487-0413 487-0414 05
Caterpillar Information System:
C175 Tier 4 Final Engines for Caterpillar Built Machines Valve Lifter - Install
Diesel Exhaust Fluid (DEF) Injector Troubleshooting Return Form for C7.1, C9.3, C13, C15, and C18 Engine Applications {108H, 108I, 7569} Diesel Exhaust Fluid (DEF) Injector Troubleshooting Return Form for C7.1, C9.3, C13, C15, and C18 Engine Applications {108H, 108I, 7569}
Installation of the 519-5587 Aftercooler Core As on Certain G3500H Series Engines {1063} Installation of the 519-5587 Aftercooler Core As on Certain G3500H Series Engines {1063}
CX38-P892 Well Servicing Transmission General Information
Starting Motor Servicing on Certain C7.1 Engines {1453} Starting Motor Servicing on Certain C7.1 Engines {1453}
A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493} A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493}
Water Pump on Certain C2.2 Engines {1361, 7555} Water Pump on Certain C2.2 Engines {1361, 7555}
C175 Tier 4 Final Engines for Caterpillar Built Machines Valve Lifter - Remove
The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C} The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C}
G3516 TA Engine Electronic Control System Parameters - Configuration Parameters
G3516 Petroleum Engine Valve Stem Projection - Measure/Record
NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408} NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408}
C27 and C32 Engine for MD6250 and MD6310 Drill Aftertreatment Identification Module - Test
C32 Tier 4 Final Marine Commercial Engines Data Link - Test
New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380} New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348} Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
CX38-P892 Well Servicing Transmission Power Train Hydraulic System
G3516 Petroleum Engine Inlet Air System - Check
G3516 Petroleum Engine Ignition System Timing - Check/Adjust
G3516 Petroleum Engine Overhaul (Major)
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
CX38-P892 Well Servicing Transmission Oil Filter (Transmission)