Valve Lifter - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty. |
| A | 3E-3879 | Eyebolt | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect all O-rings, seals, and gaskets for wear or damage. Replace if necessary.
- Install integral seal (4).
Show/hide table
Illustration 2 g06175789 - Install dowels (3) into the cylinder block.
Show/hide table
Illustration 3 g06175675 - Attach Tooling (A) and a suitable lifting device at point (X).
- Position valve lifter (2) and install bolts (1).
Show/hide table
| |
| Illustration 1 | g06175792 |
Caterpillar Information System:
Diesel Exhaust Fluid (DEF) Injector Troubleshooting Return Form for C7.1, C9.3, C13, C15, and C18 Engine Applications {108H, 108I, 7569} Diesel Exhaust Fluid (DEF) Injector Troubleshooting Return Form for C7.1, C9.3, C13, C15, and C18 Engine Applications {108H, 108I, 7569}
Installation of the 519-5587 Aftercooler Core As on Certain G3500H Series Engines {1063} Installation of the 519-5587 Aftercooler Core As on Certain G3500H Series Engines {1063}
CX38-P892 Well Servicing Transmission General Information
Starting Motor Servicing on Certain C7.1 Engines {1453} Starting Motor Servicing on Certain C7.1 Engines {1453}
A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493} A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493}
Water Pump on Certain C2.2 Engines {1361, 7555} Water Pump on Certain C2.2 Engines {1361, 7555}
C175 Tier 4 Final Engines for Caterpillar Built Machines Valve Lifter - Remove
The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C} The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C}
G3516 TA Engine Electronic Control System Parameters - Configuration Parameters
G3516 Petroleum Engine Valve Stem Projection - Measure/Record
NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408} NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408}
G3516 TA Engine Configuration Parameters
New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920} New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920}
C27 and C32 Engine for MD6250 and MD6310 Drill Aftertreatment Identification Module - Test
C32 Tier 4 Final Marine Commercial Engines Data Link - Test
New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380} New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348} Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
CX38-P892 Well Servicing Transmission Power Train Hydraulic System
G3516 Petroleum Engine Inlet Air System - Check
G3516 Petroleum Engine Ignition System Timing - Check/Adjust
G3516 Petroleum Engine Overhaul (Major)
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble