Valve Lifter - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty. |
| A | 3E-3879 | Eyebolt | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Ensure that the area around the covers is thoroughly cleaned and all contaminants are removed, any contaminants will fall directly onto the camshaft. Contaminants may cause rapid wear and shortened component life. |
Note: Inspect all O-rings, seals, and gaskets for wear or damage. Replace if necessary.
Start By:
- Remove rocker shaft and push rods. Refer to Disassembly and Assembly, "Rocker Shaft and Push Rod - Remove".
- Remove the exhaust manifolds. Refer to Disassembly and Assembly,, "Exhaust Manifold - Remove and Install"
- Attach Tooling (A) and a suitable lifting device at point (X),
- Remove bolts (1) and remove valve lifter (2).
Show/hide table
Illustration 2 g06175722 - Remove integral seal (5).
- Repeat steps 1 through 3 for the remaining valve lifters.
Show/hide table
| |
| Illustration 1 | g06175675 |
Caterpillar Information System:
The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C} The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C}
G3516 TA Engine Electronic Control System Parameters - Configuration Parameters
G3516 Petroleum Engine Valve Stem Projection - Measure/Record
NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408} NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408}
G3516 TA Engine Configuration Parameters
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C32 Marine Auxiliary Engine Before Starting Engine
New Engine Oil Cooler Groups Are Used on Certain 3500 Marine Engines {1378} New Engine Oil Cooler Groups Are Used on Certain 3500 Marine Engines {1378}
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Exhaust Has Excessive Black Smoke
C32 Marine Auxiliary Engine Reference Information
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Auxiliary Engine Engine Starting
Water Pump on Certain C2.2 Engines {1361, 7555} Water Pump on Certain C2.2 Engines {1361, 7555}
A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493} A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493}
Starting Motor Servicing on Certain C7.1 Engines {1453} Starting Motor Servicing on Certain C7.1 Engines {1453}
CX38-P892 Well Servicing Transmission General Information
Installation of the 519-5587 Aftercooler Core As on Certain G3500H Series Engines {1063} Installation of the 519-5587 Aftercooler Core As on Certain G3500H Series Engines {1063}
Diesel Exhaust Fluid (DEF) Injector Troubleshooting Return Form for C7.1, C9.3, C13, C15, and C18 Engine Applications {108H, 108I, 7569} Diesel Exhaust Fluid (DEF) Injector Troubleshooting Return Form for C7.1, C9.3, C13, C15, and C18 Engine Applications {108H, 108I, 7569}
C175 Tier 4 Final Engines for Caterpillar Built Machines Valve Lifter - Install
New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920} New Software Flash Does Not Contain B-Rating Option on Certain 3500 Marine Engines {1920}
C27 and C32 Engine for MD6250 and MD6310 Drill Aftertreatment Identification Module - Test
C32 Tier 4 Final Marine Commercial Engines Data Link - Test
New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380} New Turbocharger Coolant Lines Are Now Used on Certain 3516 Machine Engines {1052, 1380}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348} Engine Oil Contains Elevated Lead (Pb) {1000, 1348}