C32 Marine Auxiliary Engine Caterpillar


Engine Starting

Usage:

C32 MG4


PERHATIAN

JANGAN GUNAKAN CAIRAN START ETER PADA ENGINE DIESEL YANG DILENGKAPI DENGAN KATALIS SCR


Bila ada tag peringatan yang dipasang di sakelar start engine atau kontrol, JANGAN nyalakan engine atau operasikan kontrol manapun. Tanyakan kepada orang yang memasang tag peringatan tersebut sebelum engine dinyalakan.

Semua pelindung pengaman dan semua penutup pelindung harus dipasang jika engine harus dinyalakan untuk melakukan prosedur servis. Untuk membantu mencegah kecelakaan yang disebabkan oleh komponen yang berputar, berhati-hatilah saat bekerja di sekitar komponen tersebut.

Nyalakan engine dengan sakelar start engine.

Selalu nyalakan engine sesuai dengan prosedur yang dijelaskan di Buku Petunjuk Pengoperasian dan Perawatan, "Menyalakan Engine" untuk informasi tentang menyalakan engine. Ketahui prosedur yang benar untuk mencegah kerusakan parah pada komponen engine. Ketahui prosedur yang benar untuk mencegah cedera.

Untuk memastikan heater mantel air (bila terpasang) dan/atau heater oli pelumas (bila terpasang) berfungsi dengan benar, periksa pengukur temperatur air dan pengukur temperatur oli selama pengoperasian heater.

Gas buang engine mengandung zat hasil pembakaran yang dapat berbahaya bagi kesehatan. Selalu nyalakan engine dan operasikan engine di area yang berventilasi baik. Bila engine berada di area tertutup, arahkan aliran gas buang engine ke luar.

Caterpillar Information System:

C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Speed/Timing - Test
New Water-Cooled Throttles Are Now Used on Certain G3500 Engines {1265} New Water-Cooled Throttles Are Now Used on Certain G3500 Engines {1265}
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
3512B Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
3516B Generator Set Engines with Dynamic Gas Blending Timing - Calibrate
C7.1 Marine Propulsion Engine Marine Towing
C9.3B Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install
G3516 TA Engine Engine Monitoring System
C32 Marine Engine Synchronization - Test
C32 Marine Engine Switch Circuits - Test
C32 Marine Engine Speed/Timing - Test
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Auxiliary Engine Reference Information
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Exhaust Has Excessive Black Smoke
New Engine Oil Cooler Groups Are Used on Certain 3500 Marine Engines {1378} New Engine Oil Cooler Groups Are Used on Certain 3500 Marine Engines {1378}
C32 Marine Auxiliary Engine Before Starting Engine
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3516 TA Engine Configuration Parameters
NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408} NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408}
G3516 Petroleum Engine Valve Stem Projection - Measure/Record
G3516 TA Engine Electronic Control System Parameters - Configuration Parameters
The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C} The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C}
C175 Tier 4 Final Engines for Caterpillar Built Machines Valve Lifter - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.