| |
| Illustration 1 | g03888059 |
|
(1) Control panel display
(2) Customer connection (3) Panel screws | |
Control panel display (1) - The control panel display is used for monitoring and controlling many of the generator system set functions. Refer to Operations and Maintenance Manual, "Control Panel" for more information.
Customer connection (2) - The customer connection is a 9-pin connector on the panel. This connection is used with a computer that has Cat ET software loaded on the computer.
Panel screws (3) - Four panel screws are used to keep the front cover secure. Turn each screw counter-clockwise a quarter turn to open panel.
The EMCP 4.4 SCP has a 120-pin connection on the back of the control. An extra 70-pin connection is also on the back of the control.
Note: Not all the 120-pin and 70-pin connections are used.
Illustrations 2 and 3 shows the following information.
- All possible connections
- What pins are used for connections
- How each pin is connected for the EMCP 4.4 SCP
| |
| Illustration 2 | g03889272 |
|
EMCP 4.4 SCP 120-pin connection electrical diagram | |
| |
| Illustration 3 | g03889274 |
|
EMCP 4.4 SCP 70-pin connection electrical diagram | |