Flywheel Housing - Inspect
Show/hide table
Alat yang Diperlukan | |||
---|---|---|---|
Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
A | 8T-5096 | Indikator Dial | 1 |
- | Alas dan Dudukan Magnetik | 1 |
Catatan: Pemeriksaan ini harus dilakukan dengan melepaskan flywheel dan starter serta baut rumah flywheel dikencangkan.
- Pasang Peralatan (A). Lihat Gambar 1.
- Atur jarum penunjuk pada indikator dial ke
0 mm (0 inch) . - Periksa konsentrisitas pada interval 45 derajat di sekitar rumah flywheel.
- Hitung selisih antara pengukuran terendah dan pengukuran tertinggi. Selisih ini tidak boleh lebih besar daripada batas yang ditunjukkan di Tabel 2.
Catatan: Penyetelan yang diperlukan harus dilakukan terhadap rumah flywheel. Kemudian, periksa kembali konsentrisitas.
Show/hide table
Ilustrasi 1 | g01344313 |
Contoh umum |
Catatan: Pemeriksaan ini harus dilakukan dengan melepaskan flywheel dan starter serta baut rumah flywheel dikencangkan hingga torsi yang benar.
Show/hide table
Ilustrasi 2 | g01344315 |
Contoh umum |
- Pasang Peralatan (A). Lihat Gambar 2.
- Atur jarum penunjuk pada indikator dial ke
0 mm (0 inch) . - Periksa penjajaran pada interval 45 derajat di sekitar rumah flywheel.
- Hitung selisih antara pengukuran terendah dan pengukuran tertinggi. Selisih ini tidak boleh lebih besar daripada batas yang ditunjukkan di Tabel 2.
Catatan: Penyetelan yang diperlukan harus dilakukan terhadap rumah flywheel.
Show/hide tableTabel 2 Batas untuk Runout dan Penjajaran Rumah Flywheel (Total Pembacaan Indikator) Lubang Flensa Rumah Batas Maksimum (Total Pembacaan Indikator) 410 mm (16.14 inch) 0.25 mm (0.010 inch)
Caterpillar Information System:
G3600 A4 Engines Maintenance Interval Schedule - G3600 Wellhead or Natural Gas Engines with a 7.6 :1 Compression Ratio
EMCP 4.4 Supervisory Control Panel Control Panel
EMCP 4.4 Supervisory Control Panel Plate Locations and Film Locations
EMCP 4.4 Supervisory Control Panel Model View Illustrations
EMCP 4.4 Supervisory Control Panel Electrical System
EMCP 4.4 Supervisory Control Panel Safety Messages
EMCP 4.4 Supervisory Control Panel Fire Prevention and Explosion Prevention
EMCP 4.4 Supervisory Control Panel Control Panel - Inspect/Test
797F Off-Highway Truck Field Assembly Walkway - Install
Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290} Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290}
320D3 and 323D3 Excavators Machine System Specifications Cab Window
330D2 Excavators Machine System Specifications Cab
Sub-Base Tank Water Retention Rework for Certain C15, C18, and C9 Generator Sets{1273} Sub-Base Tank Water Retention Rework for Certain C15, C18, and C9 Generator Sets{1273}
C7.1 Commercial Marine Engine Gear Group - Inspect
C7.1 Commercial Marine Engine V-Belt - Test
Energy Storage System Safety
Energy Storage System Plate Locations and Film Locations
2015/09/11 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Fluid End - Remove and Install
XQ35 Rental Generator Set Product Lifting
C7.1 Marine Engine Event Codes
3516E Generator Set Engine Air Inlet and Exhaust System Operation
3516E Generator Set Engine Turbocharger
Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070} Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070}