330D2 Excavators Machine System Specifications Caterpillar


Cab

Usage:

330D2 DTG


Illustration 1g03882444
Typical example

Table 1
Item  Qty  Part  Specification description 
Bolt  Torque to 19.60 to 28.42 N·m (173.47 to 251.53 lb in)


Illustration 2g03881985

Table 2
Item  Qty  Part  Specification description 
9X-2041 Screw  Torque to 54.88 ± 9.80 N·m (40.48 ± 7.23 lb ft)

Caterpillar Information System:

2015/09/02 Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/08/28 New Software Is Available for Certain G3516B Petroleum Engines {1920, 7620}
2015/09/04 A New Installation Procedure Is Used for Certain 3512E Well Frac Engines {1274}
C1.7 and C2.2 Industrial Engines Electrical System
C7.1 Marine Engine Cooling System - Test
C7.1 Commercial Marine Engine Cooling System - Inspect
C7.1 Commercial Marine Engine Cooling System - Check
797 Off-Highway Truck Wheel, Brake and Suspension (Front) - Install - Special Nut Assembly
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Maintenance Interval Schedule
C7.1 Commercial Marine Engine Engine Valve Lash - Inspect
C7.1 Commercial Marine Engine Fuel System - Prime
2015/09/11 A New Alternator Is Now Used On Certain 3412, C27, and C32 Generator Set Engines {1405}
320D3 and 323D3 Excavators Machine System Specifications Cab Window
Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290} Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290}
797F Off-Highway Truck Field Assembly Walkway - Install
EMCP 4.4 Supervisory Control Panel Control Panel - Inspect/Test
EMCP 4.4 Supervisory Control Panel Fire Prevention and Explosion Prevention
EMCP 4.4 Supervisory Control Panel Safety Messages
EMCP 4.4 Supervisory Control Panel Electrical System
EMCP 4.4 Supervisory Control Panel Model View Illustrations
EMCP 4.4 Supervisory Control Panel Plate Locations and Film Locations
EMCP 4.4 Supervisory Control Panel Control Panel
G3600 A4 Engines Maintenance Interval Schedule - G3600 Wellhead or Natural Gas Engines with a 7.6 :1 Compression Ratio
C7.1 Commercial Marine Engine Flywheel Housing - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.