CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Caterpillar


Maintenance Interval Schedule

Usage:

CN1566 RJ3
在进行任何操作或维护步骤之前,确保已阅读并理解所有的安全信息、警告和说明。

用户有责任对机器进行保养,包括所有调整、使用正确的润滑剂、油液、滤清器和由于正常磨损和老化引起的零件更换。 未能遵照正确的保养周期和步骤可能导致产品性能降低和/或部件磨损加速。

使用里程数、燃油消耗量、工作小时数或日历时间(以先到者为准)确定保养周期。 在恶劣作业条件下工作的产品可能需要更频密的保养。

注: 在进行每个后续周期的保养之前,必须先进行前一个周期的所有保养。

需要时即进行的保养

热交换器 - 清洁
空间加热器 - 检查/更换

每3个月

转子 - 旋转

每 6 个月

转子 - 旋转

每4000工作小时

轴承绝缘层 - 清洁
一般结构 - 检查
绕组绝缘电阻 - 测试
冷却滤清器 - 清洁
滚柱轴承 - 检查
套筒轴承 - 检查

Caterpillar Information System:

C7.1 Commercial Marine Engine Engine Valve Lash - Inspect
C7.1 Commercial Marine Engine Fuel System - Prime
2015/09/11 A New Alternator Is Now Used On Certain 3412, C27, and C32 Generator Set Engines {1405}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Diagnostic Trouble Codes
3516E Generator Set Engine Sensor Signal (Analog, Passive) - Test
3516B Generator Set Engines with Dynamic Gas Blending Sensor Signal (PWM) - Test
3516E Generator Set Engine Speed/Timing - Test
3516E Generator Set Engine Speed Control - Test
3516E Generator Set Engine Solenoid Valve - Test
3516E Generator Set Engine Sensor Signal (Analog, Active) - Test
3516E Generator Set Engine Sensor Supply - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System System Schematic
797 Off-Highway Truck Wheel, Brake and Suspension (Front) - Install - Special Nut Assembly
C7.1 Commercial Marine Engine Cooling System - Check
C7.1 Commercial Marine Engine Cooling System - Inspect
C7.1 Marine Engine Cooling System - Test
C1.7 and C2.2 Industrial Engines Electrical System
2015/09/04 A New Installation Procedure Is Used for Certain 3512E Well Frac Engines {1274}
2015/08/28 New Software Is Available for Certain G3516B Petroleum Engines {1920, 7620}
2015/09/02 Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
330D2 Excavators Machine System Specifications Cab
320D3 and 323D3 Excavators Machine System Specifications Cab Window
Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290} Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290}
797F Off-Highway Truck Field Assembly Walkway - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.