2015/08/28 Caterpillar


New Software Is Available for Certain G3516B Petroleum Engines {1920, 7620}

Usage:

G3516B JEF
Engine:
G3516B (S/N: JEF1-UP)

The new engine software has an updated load factor calibration and other updated software features.

The new 493-0340 Engine Ratings Electronic Software Gp replaces the existing 390-9075 Engine Ratings Electronic Software Gp .

Note: The 493-0340 Engine Ratings Electronic Software Gp is only adaptable to the serial numbers listed above that have the 390-9075 Engine Ratings Electronic Software Gp already installed.

Caterpillar Information System:

2015/09/04 A New Installation Procedure Is Used for Certain 3512E Well Frac Engines {1274}
C1.7 and C2.2 Industrial Engines Electrical System
C7.1 Marine Engine Cooling System - Test
C7.1 Commercial Marine Engine Cooling System - Inspect
C7.1 Commercial Marine Engine Cooling System - Check
797 Off-Highway Truck Wheel, Brake and Suspension (Front) - Install - Special Nut Assembly
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Maintenance Interval Schedule
C7.1 Commercial Marine Engine Engine Valve Lash - Inspect
C7.1 Commercial Marine Engine Fuel System - Prime
2015/09/11 A New Alternator Is Now Used On Certain 3412, C27, and C32 Generator Set Engines {1405}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Diagnostic Trouble Codes
3516E Generator Set Engine Sensor Signal (Analog, Passive) - Test
2015/09/02 Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
330D2 Excavators Machine System Specifications Cab
320D3 and 323D3 Excavators Machine System Specifications Cab Window
Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290} Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290}
797F Off-Highway Truck Field Assembly Walkway - Install
EMCP 4.4 Supervisory Control Panel Control Panel - Inspect/Test
EMCP 4.4 Supervisory Control Panel Fire Prevention and Explosion Prevention
EMCP 4.4 Supervisory Control Panel Safety Messages
EMCP 4.4 Supervisory Control Panel Electrical System
EMCP 4.4 Supervisory Control Panel Model View Illustrations
EMCP 4.4 Supervisory Control Panel Plate Locations and Film Locations
EMCP 4.4 Supervisory Control Panel Control Panel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.