Product Lifting
Show/hide table
| 注意 |
|---|
|
千万不要折弯吊环螺栓和支架。 吊环螺栓和支架只能承受张力负荷。 要记住当支承构件和物体之间的角度小于90°时，吊环螺栓的承载能力变小。 当必须在某一角度搬移部件时，只能使用具有适当额定载荷的连杆支架。 |
使用起重机搬移重的部件。 使用一个可调的吊粱起吊发动机。 所有的支承构件（链条和钢丝绳）应互相平行。 链条和钢丝绳与被吊物的顶面尽可能保持垂直。
Show/hide table
| |
| 图 1 | g03882471 |
|
典型示例 (1) 前后吊耳 | |
Caterpillar Information System:
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Fluid End - Remove and Install
2015/09/11 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
Energy Storage System Plate Locations and Film Locations
Energy Storage System Safety
C7.1 Commercial Marine Engine V-Belt - Test
C7.1 Commercial Marine Engine Gear Group - Inspect
Sub-Base Tank Water Retention Rework for Certain C15, C18, and C9 Generator Sets{1273} Sub-Base Tank Water Retention Rework for Certain C15, C18, and C9 Generator Sets{1273}
C7.1 Commercial Marine Engine Flywheel Housing - Inspect
G3600 A4 Engines Maintenance Interval Schedule - G3600 Wellhead or Natural Gas Engines with a 7.6 :1 Compression Ratio
EMCP 4.4 Supervisory Control Panel Control Panel
EMCP 4.4 Supervisory Control Panel Plate Locations and Film Locations
EMCP 4.4 Supervisory Control Panel Model View Illustrations
C7.1 Marine Engine Event Codes
3516E Generator Set Engine Air Inlet and Exhaust System Operation
3516E Generator Set Engine Turbocharger
Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070} Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070}
3516B Generator Set Engines with Dynamic Gas Blending Test Tools for the Cooling System
EMCP4.2B Setpoint Programming
C12.9 Marine Engines Product Lifting
EMCP4.2B Digital Input Programming
320D2 and 323D2 Excavators Machine Systems Specifications Shuttle Valve (Pilot Lines)
2015/09/11 Current Transformer Coils on Certain C7.1 and C4.4 Marine Generator Sets {4476}
C1.7 and C2.2 Industrial Engines Monitoring System - Engine Warning Indicators
Loosening of the 384-0519 Band Clamps on Certain 3500C Locomotive and Marine Engines{1059} Loosening of the 384-0519 Band Clamps on Certain 3500C Locomotive and Marine Engines{1059}