C7.1 Commercial Marine Engine Caterpillar


Gear Group - Inspect

Usage:

C7.1 GJN


Ilustrasi 1g03882148
(1) Roda-gigi camshaft
(2) Roda-gigi idler
(3) Roda gigi pompa injeksi bahan bakar

    Catatan: Jika satu atau beberapa roda gigi perlu dilepaskan untuk diperbaiki, rujuk ke Pembongkaran dan Perakitan, "Grup Roda Gigi (Depan) - Pelepasan" untuk melepaskan roda gigi. Lihat Pembongkaran dan Perakitan, "Grup Roda Gigi (Depan) - Pemasangan" untuk memasang roda gigi.

  1. Periksa roda-gigi terhadap keausan atau kerusakan. Jika roda-gigi aus atau rusak, gunakan komponen baru untuk penggantian.

  2. Ukur celah antara roda gigi camshaft (1) dan roda gigi idler (2). Lihat Spesifikasi, "Grup Roda Gigi (Depan)" untuk pengukuran celah.

  3. Ukur celah antara roda gigi idler (2) dan roda gigi crankshaft (4). Lihat Spesifikasi, "Grup Roda Gigi (Depan)" untuk pengukuran celah.

  4. Ukur celah antara roda gigi pompa injeksi bahan bakar (3) dan roda gigi idler (2). Lihat Spesifikasi, "Grup Roda Gigi (Depan)" untuk pengukuran celah.

  5. Ukur kelonggaran ujung di roda gigi idler (2). Lihat Pembongkaran dan Perakitan, "Roda Gigi Idler - Pemasangan" untuk prosedur yang benar. Lihat Spesifikasi, "Grup Roda Gigi (Depan)" untuk pengukuran kelonggaran ujung.

Caterpillar Information System:

Sub-Base Tank Water Retention Rework for Certain C15, C18, and C9 Generator Sets{1273} Sub-Base Tank Water Retention Rework for Certain C15, C18, and C9 Generator Sets{1273}
C7.1 Commercial Marine Engine Flywheel Housing - Inspect
G3600 A4 Engines Maintenance Interval Schedule - G3600 Wellhead or Natural Gas Engines with a 7.6 :1 Compression Ratio
EMCP 4.4 Supervisory Control Panel Control Panel
EMCP 4.4 Supervisory Control Panel Plate Locations and Film Locations
EMCP 4.4 Supervisory Control Panel Model View Illustrations
EMCP 4.4 Supervisory Control Panel Electrical System
EMCP 4.4 Supervisory Control Panel Safety Messages
EMCP 4.4 Supervisory Control Panel Fire Prevention and Explosion Prevention
EMCP 4.4 Supervisory Control Panel Control Panel - Inspect/Test
797F Off-Highway Truck Field Assembly Walkway - Install
Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290} Some Reman Injectors Have Been Labeled With The Incorrect Part Number{1254, 1290}
C7.1 Commercial Marine Engine V-Belt - Test
Energy Storage System Safety
Energy Storage System Plate Locations and Film Locations
2015/09/11 New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Fluid End - Remove and Install
XQ35 Rental Generator Set Product Lifting
C7.1 Marine Engine Event Codes
3516E Generator Set Engine Air Inlet and Exhaust System Operation
3516E Generator Set Engine Turbocharger
Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070} Crankshaft Bearing Housing Assembly Instructions for Well Stimulation Pumps {1202, 5070}
3516B Generator Set Engines with Dynamic Gas Blending Test Tools for the Cooling System
EMCP4.2B Setpoint Programming
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.