Front Lines
Show/hide table
| |
| Illustration 1 | g03859645 |
|
Top view | |
Show/hide table
| Specification for 388-0303 Front Lines Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 6 | 7K-1181 Cable Strap | Sharp corners at each strap cutting edge shall not be allowed. |
| 2 | 1 | 123-4750 Check Valve As | Torque to |
| 3 | 1 | 275-1690 Hose As | Torque to |
| 4 | 1 | 148-8336 Connector As | Torque to |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
XQ400 Power Module Model View Illustrations
C8.7 Marine Engine Crankshaft Gear - Remove and Install
3512C Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install
XQ400 Power Module Safety Messages
2015/09/04 A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
3512C Generator Set Engine Engine Speed/Timing Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Disassemble
C3.4B Engines General Information
C3.4B Engines Component Location
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Assemble
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}
3512C Generator Set Engine Air Inlet Manifold - Remove and Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Rocker Shaft and Pushrod - Install
G3606 and G3608 Engines Gear Group (Rear) - Remove and Install
XQ400 Power Module Coolant Level - Check