A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
- Engine:
- 3512B (S/N: YAY1-UP)
- Power Module:
- PM3512 (S/N: TC81-UP)
Description of Change: The new breather hose has been improved to work in higher heat environments when the engine is operating.
Adaptable To: The new 450-8483 Hose (130 mm-5.12 inch) is a direct replacement of the existing hose. When installing the new breather hose use two 268-5605 Hose Clamps. The new breather hose is adaptable back to first production on the serial numbers listed above.
Show/hide table
 | |
| Illustration 1 | g03859837 |
(1) 450-8483 Hose (130 mm-5.12 inch) (2) 268-5605 Hose Clamp | |
Show/hide table
 | |
| Illustration 2 | g03859840 |
(1) 450-8483 Hose (130 mm-5.12 inch) (2) 268-5605 Hose Clamp | |
This change is effective for the serial numbers listed in Table 1.
Show/hide table
| Effective Serial Numbers |
| S/N:YAY01339-UP |
| S/N:TC800151-UP |
Caterpillar Information System:
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
3512C Generator Set Engine Engine Speed/Timing Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Disassemble
794 AC Off-Highway Truck Field Assembly Mirror - Install
3512C Generator Set Engine Aftercooler Coolant Temperature Sensor - Remove and Install
CG137-08 and CG137-12 Engines Engine Air Cleaner Service Indicator - Inspect - If Equipped
3512C Generator Set Engine Coolant Temperature Sensor - Remove and Install
C280 Marine Engines Fuel Pressure
3512C Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install
120 and 120 AWD Motor Grader Fuel System Water Separator - Drain
3512C Generator Set Engine Turbocharger Inlet Pressure Sensor - Remove and Install
XQ400 Power Module Safety Messages
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install
3512C Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
C8.7 Marine Engine Crankshaft Gear - Remove and Install
XQ400 Power Module Model View Illustrations
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
349F and 352F Excavators Machine System Specifications Front Lines
C3.4B Engines General Information
C3.4B Engines Component Location
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Assemble