Turbocharger Outlet Pressure Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1).
- Remove turbocharger outlet pressure sensor (2) and adapter (3).
Show/hide table
Illustration 1 | g03859310 |
- Install turbocharger outlet pressure sensor (2) in the reverse order of removal.
- Tighten turbocharger outlet pressure sensor (2) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
- Tighten turbocharger outlet pressure sensor (2) to a torque of
Caterpillar Information System:
120 and 120 AWD Motor Grader Fuel System Water Separator - Drain
3512C Generator Set Engine Turbocharger Inlet Pressure Sensor - Remove and Install
120 and 120 AWD Motor Grader Fuel System Filter - Replace
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
3512C Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
3512C Generator Set Engine Coolant Level Sensor - Remove and Install
120 and 120 AWD Motor Grader Engine Oil Sample - Obtain
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
349F and 352F Excavators Machine System Specifications Gear Pump
HPU300 Hydraulic Power Pack Additional Messages
Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324} Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}
2015/07/10 New Engine Software Is Now Used For Certain Tier 4 Final Engines {1920}
C280 Marine Engines Fuel Pressure
3512C Generator Set Engine Coolant Temperature Sensor - Remove and Install
CG137-08 and CG137-12 Engines Engine Air Cleaner Service Indicator - Inspect - If Equipped
3512C Generator Set Engine Aftercooler Coolant Temperature Sensor - Remove and Install
794 AC Off-Highway Truck Field Assembly Mirror - Install
C280-08 Tier 4 Engine Turbocharger - Disassemble
3512C Generator Set Engine Engine Speed/Timing Sensor - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
2015/09/04 A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
XQ400 Power Module Safety Messages
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install