Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.
Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Cat dealer can provide new messages.
Illustration 1 | g03858951 |
Lift Point (1)
This message is located on the lance.
Illustration 2 | g03858950 |
In order to lift the machine, attach the lifting devices to the lifting points.
Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for more information.
Tie Down Point (2)
This message is located on the side trim.
Illustration 3 | g03858952 |
In order to tie down the machine, attach the tie-downs to the tie down points.
Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for more information.
Hydraulic Oil (3)
This message is located on the hydraulic oil reservoir.
Illustration 4 | g03621736 |
Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for more information about the oil.