Engine Oil Pressure Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1). Remove unfiltered engine oil pressure sensor (2) and elbow (3).
Show/hide table
Illustration 2 g03859155 - Disconnect harness assembly (4).
- Remove filtered engine oil pressure sensor (5) and adapter (6).
Show/hide table
Illustration 1 | g03859145 |
- Install filtered engine oil pressure sensor (5) and unfiltered engine oil pressure sensor (2) in the reverse order of removal.
- Lubricate the bore of filtered engine oil pressure sensor (5) and unfiltered engine oil pressure sensor (2) with the fluid that is being sealed.
- Tighten filtered engine oil pressure sensor (5) and unfiltered engine oil pressure sensor (2) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
Caterpillar Information System:
3512C Generator Set Engine Coolant Level Sensor - Remove and Install
120 and 120 AWD Motor Grader Engine Oil Sample - Obtain
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
349F and 352F Excavators Machine System Specifications Gear Pump
HPU300 Hydraulic Power Pack Additional Messages
Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324} Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}
2015/07/10 New Engine Software Is Now Used For Certain Tier 4 Final Engines {1920}
3512C Generator Set Engine Fan Drive - Assemble
G3606 and G3608 Engines Camshaft Drive Gear - Install
3512C Generator Set Engine Fan Drive - Disassemble
Cat® <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469} Cat® <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469}
Cat® <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469} Cat® <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469}
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
120 and 120 AWD Motor Grader Fuel System Filter - Replace
3512C Generator Set Engine Turbocharger Inlet Pressure Sensor - Remove and Install
120 and 120 AWD Motor Grader Fuel System Water Separator - Drain
3512C Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C280 Marine Engines Fuel Pressure
3512C Generator Set Engine Coolant Temperature Sensor - Remove and Install
CG137-08 and CG137-12 Engines Engine Air Cleaner Service Indicator - Inspect - If Equipped
3512C Generator Set Engine Aftercooler Coolant Temperature Sensor - Remove and Install
794 AC Off-Highway Truck Field Assembly Mirror - Install
C280-08 Tier 4 Engine Turbocharger - Disassemble
3512C Generator Set Engine Engine Speed/Timing Sensor - Remove and Install