Fan Drive - Disassemble
Start By:
- Remove fan drive.
- Remove bolts (2) and washer (1).
Show/hide table
Illustration 2 g03858700 - Remove bearing cup (5), bearing cone (4), and fan pulley hub (3).
Show/hide table
Illustration 3 g03858706 - Remove spacer (8), bearing cone (9), bearing cup (7), and lip seal (6).
Show/hide table
Illustration 4 g03858746 - Remove bolts (12), bracket (11), shaft (10), and the O-ring seal.
Show/hide table
Illustration 5 g03858751 - Remove bolts (13) and fan bracket assembly (14).
Show/hide table
Illustration 6 g03858767 - Remove grease fitting (18).
- Remove sleeve (15), bolt (16), and shaft (17).
Show/hide table
Illustration 1 | g03858695 |
Caterpillar Information System:
Cat® <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469} Cat® <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469}
Cat® <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469} Cat® <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Speed - Check
3512C Generator Set Engine Fan Drive - Remove and Install
2015/09/04 New Engine Software Is Used for Certain 3600 and C280 Marine Engines {1920}
120 and 120 AWD Motor Grader Transmission and Differential Oil Level - Check
120 and 120 AWD Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
120 and 120 AWD Motor Grader Transmission and Differential Oil - Change
120 and 120 AWD Motor Grader Engine Oil and Filter - Change
352F Excavator Maintenance Interval Schedule
323F LN Excavator Machine Systems Swing Speed and Overswing on Level Ground - Check
323F SA Excavator and 323F MHPU Machine Systems Engine Performance - Test - Engine Speed
G3606 and G3608 Engines Camshaft Drive Gear - Install
3512C Generator Set Engine Fan Drive - Assemble
2015/07/10 New Engine Software Is Now Used For Certain Tier 4 Final Engines {1920}
Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324} Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}
HPU300 Hydraulic Power Pack Additional Messages
349F and 352F Excavators Machine System Specifications Gear Pump
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
120 and 120 AWD Motor Grader Engine Oil Sample - Obtain
3512C Generator Set Engine Coolant Level Sensor - Remove and Install
3512C Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
120 and 120 AWD Motor Grader Fuel System Filter - Replace