745 and 740 GC & 740 EJECTOR Articulated Truck Systems Caterpillar


Solenoid Valve

Usage:

745 3T6


Illustration 1g06310555

Table 1
Item  Qty  Part  Specification Description 
316-1438 Cartridge As  Torque to 35 ± 3 N·m (26 ± 2 lb ft)
198-2914 Nut  Torque to 20 ± 2 N·m (177 ± 18 lb in)
Torque to 50 ± 5 N·m (37 ± 4 lb ft)
287-3968 Spring  Length under test force 1 is 21.65 mm (0.852 inch).
Test force 1 is 4.04 ± 0.90 N (0.91 ± 0.20 lb).
Length under test force 2 is 15.49 mm (0.610 inch).
Test force 2 is 28.68 ± 1.10 N (6.45 ± 0.25 lb).
Free length is 22.66 mm (0.892 inch)
Nominal voltage is 24 VDC. 
Coil resistance at 25° C (77° F)2.95 ± 0.2 ohms. 

Caterpillar Information System:

349F and 352F Excavators Machine System Specifications Gear Pump
HPU300 Hydraulic Power Pack Additional Messages
Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324} Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}
2015/07/10 New Engine Software Is Now Used For Certain Tier 4 Final Engines {1920}
3512C Generator Set Engine Fan Drive - Assemble
G3606 and G3608 Engines Camshaft Drive Gear - Install
3512C Generator Set Engine Fan Drive - Disassemble
Cat&reg; <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469} Cat&reg; <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469}
Cat&reg; <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469} Cat&reg; <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Speed - Check
3512C Generator Set Engine Fan Drive - Remove and Install
2015/09/04 New Engine Software Is Used for Certain 3600 and C280 Marine Engines {1920}
120 and 120 AWD Motor Grader Engine Oil Sample - Obtain
3512C Generator Set Engine Coolant Level Sensor - Remove and Install
3512C Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
120 and 120 AWD Motor Grader Fuel System Filter - Replace
3512C Generator Set Engine Turbocharger Inlet Pressure Sensor - Remove and Install
120 and 120 AWD Motor Grader Fuel System Water Separator - Drain
3512C Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C280 Marine Engines Fuel Pressure
3512C Generator Set Engine Coolant Temperature Sensor - Remove and Install
CG137-08 and CG137-12 Engines Engine Air Cleaner Service Indicator - Inspect - If Equipped
3512C Generator Set Engine Aftercooler Coolant Temperature Sensor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.