Fan Drive - Remove and Install
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03858289 - Disconnect coupling assemblies (2), coupling assemblies (3), and tube assemblies (1).
Show/hide table
Illustration 2 g03858349 - Remove bolts (4) and guard assemblies (5).
Show/hide table
Illustration 3 g03858365 - Remove bolts (6).
Show/hide table
Illustration 4 g03858383 - Remove bolts (7).
Show/hide table
Illustration 5 g03858386 - Remove bolts (9). guard assembly (8), and guard assembly (10).
Show/hide table
Illustration 6 g03858388 - Remove bolts (11), bolts (13), bolt (14), and brace assembly (12).
Show/hide table
Illustration 7 g03858411 - Remove bolts (15), bolt (17), bolts (18), and brace assembly (16).
Show/hide table
Illustration 8 g03858421 - Remove belts (19). Refer to Operation and Maintenance Manual, "Belts-Inspect/Replace" to remove and install the belts.
Show/hide table
Illustration 9 g03858429 - Use a suitable lifting device to remove blower fan assembly (21), guard assembly (22), and fan adapter (24). The combined weight of blower fan assembly (21), guard assembly (22), and fan adapter (24) is approximately
400 kg (882 lb) . - Remove bolts (20), bolts (23) blower fan assembly (21), guard assembly (22), and fan adapter (24).
Show/hide table
Illustration 10 g03858449 - Remove bolts (25) and fan adapter (24).
Show/hide table
Illustration 11 g03858455 - Remove bolts (26) and fan pulley (27).
Show/hide table
Illustration 12 g03858472 - Remove bolts (28) and fan drive (29).
- Install fan drive (29) in the reverse order of removal.
Caterpillar Information System:
2015/09/04 New Engine Software Is Used for Certain 3600 and C280 Marine Engines {1920}
120 and 120 AWD Motor Grader Transmission and Differential Oil Level - Check
120 and 120 AWD Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
120 and 120 AWD Motor Grader Transmission and Differential Oil - Change
120 and 120 AWD Motor Grader Engine Oil and Filter - Change
352F Excavator Maintenance Interval Schedule
323F LN Excavator Machine Systems Swing Speed and Overswing on Level Ground - Check
323F SA Excavator and 323F MHPU Machine Systems Engine Performance - Test - Engine Speed
2015/07/07 Improved Flow Limiters Are Used in Certain C175 Commercial Engines {1288}
323F LN Excavator Machine Systems Operational Checks
2015/07/07 A New Charging Alternator Is Used on Certain 3412C, C27, and C32 Commercial Engines {1405}
Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines {1405} Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines {1405}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Speed - Check
Cat® <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469} Cat® <B>S/N:</B>AT9 Automatic Transfer Switch (250 AMP to 3200 AMP){4469}
Cat® <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469} Cat® <B>S/N:</B>CT9 Automatic Transfer Switch (63 AMP to 160 AMP){4469}
3512C Generator Set Engine Fan Drive - Disassemble
G3606 and G3608 Engines Camshaft Drive Gear - Install
3512C Generator Set Engine Fan Drive - Assemble
2015/07/10 New Engine Software Is Now Used For Certain Tier 4 Final Engines {1920}
Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324} Improved Operator Seat Air Compressor Is Now Available for Certain Machines {731K, 7324}
HPU300 Hydraulic Power Pack Additional Messages
349F and 352F Excavators Machine System Specifications Gear Pump
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Solenoid Valve
120 and 120 AWD Motor Grader Engine Oil Sample - Obtain