Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines {1405}
- Generator Set
- C18 MARINE GS (S/N: GBM1-UP; MGS1-UP)
- Industrial Engine
- C-15 IND (S/N: BEM1-UP)
- C15 IND (S/N: JRE1-UP; MCW1-UP)
- C18 INDUSTRIAL (S/N: WJH1-UP; WRH1-UP)
- C15 IND (S/N: JRE1-UP; MCW1-UP)
- Marine Engine
- C15 MARINE (S/N: RLA1-UP)
- C18 MARINE (S/N: PLE1-UP; C1J1-UP)
- C18 MARINE ENG (S/N: T2P1-UP)
- C18 MARINE (S/N: PLE1-UP; C1J1-UP)
- Petroleum Engine
- C15 PETROLEUM (S/N: JDK1-UP; JDY1-UP)
- C18 PETROLEUM (S/N: WJW1-UP)
Description Of Change: The improved alternator mounting groups offer resistance to vibration. The improved alternator mounting groups utilize isolation mounts.
Adaptable To: The improvement has been made to the alternator mounting groups listed in Table 1.
Show/hide table
Part Number |
---|
286-8180 |
286-8179 |
186-3652 |
186-3653 |
Reference: Special Instruction, SEHS0125, Improved Alternator Mounting Groups Are Used for Certain C15 and C18 Industrial, Marine, and Petroleum Engines for additional information.Refer to Table 2 for a list of part numbers needed to install the improved alternator mounting groups.
Show/hide table
New Part Number | Description | Quantity |
054-3788 | Washer | 1 |
0L-1329 | Bolt | 1 |
0S-1587 | Bolt | 1 |
0S-1588 | Bolt | 2 |
1F-7958 | Full Nut | 1 |
2B-0947 | Bolt | 1 |
437-7746 | Mount | 2 |
444-6549 | Rod As | 1 |
451-8195 | Rod | 1 |
479-0175 | Support Bracket | 1 |
481-2522 | Block | 1 |
481-3933 | Block | 1 |
5L-5012 | V-Belt Set | 1 |
5P-8245 | Hard Washer | 2 |
6V-2605 | Taperlock Stud | 1 |
7X-3374 | Full Nut | 3 |
9H-8260 | Bolt | 1 |
9X-6458 | Hard Washer | 2 |
Show/hide table
Effective Serial Numbers |
S/N:BEM07171-UP |
S/N:JDK00570-UP |
S/N:JDY00769-UP |
S/N:JRE14639-UP |
S/N:MCW09675-UP |
S/N:RLA01079-UP |
S/N:C1J01135-UP |
S/N:GBM01449-UP |
S/N:MGS00921-UP |
S/N:PLE00644-UP |
S/N:T2P5073-UP |
S/N:WJH09626-UP |
S/N:WJW00296-UP |
S/N:WRH08009-UP |
Caterpillar Information System:
120 and 120 AWD Motor Grader Engine Oil Level - Check
120 and 120 AWD Motor Grader Battery Disconnect Switch
G3606 and G3608 Engines Camshaft Drive Gear - Remove
New Fuel Lines and Mounting Hardware Installation On Certain 3500 Engines{1252, 1274} New Fuel Lines and Mounting Hardware Installation On Certain 3500 Engines{1252, 1274}
120 and 120 AWD Motor Grader Brake Accumulator - Check
120 and 120 AWD Motor Grader Lubricant Viscosities - Fluids Recommendations
120 and 120 AWD Motor Grader Capacities (Refill)
3512C Generator Set Engine Radiator Core - Remove and Install
C8.7 Marine Engine Engine Oil Pan - Remove and Install
Cat® Command For Hauling MID 039 - CID 3710 - FMI 19
Cat® Command For Hauling MID 039 - CID 3710 - FMI 02
3516C and C175-16 Engines Selective Catalytic Reduction Cat ET Service Features
2015/07/07 A New Charging Alternator Is Used on Certain 3412C, C27, and C32 Commercial Engines {1405}
323F LN Excavator Machine Systems Operational Checks
2015/07/07 Improved Flow Limiters Are Used in Certain C175 Commercial Engines {1288}
323F SA Excavator and 323F MHPU Machine Systems Engine Performance - Test - Engine Speed
323F LN Excavator Machine Systems Swing Speed and Overswing on Level Ground - Check
352F Excavator Maintenance Interval Schedule
120 and 120 AWD Motor Grader Engine Oil and Filter - Change
120 and 120 AWD Motor Grader Transmission and Differential Oil - Change
120 and 120 AWD Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
120 and 120 AWD Motor Grader Transmission and Differential Oil Level - Check
2015/09/04 New Engine Software Is Used for Certain 3600 and C280 Marine Engines {1920}
3512C Generator Set Engine Fan Drive - Remove and Install