Engine Speed/Timing Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1).
- Remove engine speed/timing sensor (2).
Show/hide table
Illustration 1 | g03859438 |
- Install engine speed/timing sensor (2) in the reverse order of removal.
- Lubricate the bore of engine speed/timing sensor (2) with the fluid that is being sealed.
- Tighten engine speed/timing sensor (2) to a torque of
40 ± 5 N·m (30 ± 4 lb ft) .
Caterpillar Information System:
C280-08 Tier 4 Engine Turbocharger - Disassemble
794 AC Off-Highway Truck Field Assembly Mirror - Install
3512C Generator Set Engine Aftercooler Coolant Temperature Sensor - Remove and Install
CG137-08 and CG137-12 Engines Engine Air Cleaner Service Indicator - Inspect - If Equipped
3512C Generator Set Engine Coolant Temperature Sensor - Remove and Install
C280 Marine Engines Fuel Pressure
3512C Generator Set Engine Turbocharger Outlet Pressure Sensor - Remove and Install
120 and 120 AWD Motor Grader Fuel System Water Separator - Drain
3512C Generator Set Engine Turbocharger Inlet Pressure Sensor - Remove and Install
120 and 120 AWD Motor Grader Fuel System Filter - Replace
CX31-P600 Petroleum Transmission Maintenance Interval Schedule
3512C Generator Set Engine Engine Oil Pressure Sensor - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
2015/09/04 A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
XQ400 Power Module Safety Messages
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install
3512C Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
C8.7 Marine Engine Crankshaft Gear - Remove and Install
XQ400 Power Module Model View Illustrations
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
349F and 352F Excavators Machine System Specifications Front Lines
C3.4B Engines General Information