Atmospheric Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1).
- Remove atmospheric pressure sensor (2) and adapter (3).
Show/hide table
| |
| Illustration 1 | g03859469 |
- Install atmospheric pressure sensor (2) in the reverse order of removal.
- Lubricate the bore of atmospheric pressure sensor (2) with the fluid that is being sealed.
- Tighten atmospheric pressure sensor (2) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .
Caterpillar Information System:
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install
XQ400 Power Module Safety Messages
2015/09/04 A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
3512C Generator Set Engine Engine Speed/Timing Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Disassemble
794 AC Off-Highway Truck Field Assembly Mirror - Install
3512C Generator Set Engine Aftercooler Coolant Temperature Sensor - Remove and Install
CG137-08 and CG137-12 Engines Engine Air Cleaner Service Indicator - Inspect - If Equipped
3512C Generator Set Engine Coolant Temperature Sensor - Remove and Install
C280 Marine Engines Fuel Pressure
C8.7 Marine Engine Crankshaft Gear - Remove and Install
XQ400 Power Module Model View Illustrations
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
349F and 352F Excavators Machine System Specifications Front Lines
C3.4B Engines General Information
C3.4B Engines Component Location
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Assemble
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}