C3.4B Engines Caterpillar


Component Location

Usage:

CCS7 4B2

Electronic Control Circuit Diagram



Illustration 1g03697844
Electronic control circuit diagram

Component Locations



Illustration 2g03698957
Sensors and electrical connector locations on the left side of the engine
(1) High-pressure fuel pump inlet metering valve
(2) 10-pin engine interface connector
(3) 62-pin engine interface connector
(4) Fuel temperature sensor
(5) Fuel rail pressure sensor
(6) Oil pressure switch
(7) Primary speed/timing sensor (crankshaft)
(8) Water In Fuel (WIF) sensor


Illustration 3g03699376
Sensors and electrical connector locations on the left side of the engine
(1) High-pressure fuel pump inlet metering valve
(2) 10-pin engine interface connector
(3) 62-pin engine interface connector
(4) Fuel temperature sensor
(5) Fuel rail pressure sensor
(6) Oil pressure switch
(7) Primary speed/timing sensor (crankshaft)
(8) Water In Fuel (WIF) sensor


Illustration 4g03699378
Sensors and electrical connector locations on the right side of the engine
(9) Exhaust Gas Recirculation (EGR) valve
(10) Intake manifold air pressure and temperature sensor
(11) Exhaust temperature sensor connector
(12) Exhaust gas pressure sensor
(13) Intake throttle valve
(14) Coolant temperature sensor
(15) Wastegate regulator
(16) Secondary (camshaft) speed/timing sensor

Clean Emissions Module (CEM)



Illustration 5g03699404
Typical view of the sensor locations on the CEM on the engine
(17) Engine out NOx sensor
(18) Diesel Exhaust Fluid (DEF) injector
(19) Diesel Oxidation Catalyst (DOC)/DEF mixing chamber module
(20) DOC inlet temperature sensor


Illustration 6g03699407
Typical view of the remote mounted components for the engine
(21) Inlet air temperature sensor
(22) Breather heater
(23) Heater Control Unit (HCU)
(24) Glow plug Control Unit (GCU)
(25) Coolant diverter valve
(26) Selective Catalytic Reduction (SCR) catalyst
(27) DEF pump module
(28) SCR inlet/outlet temperature sensors
(29) Ammonia sensor
(30) Tailpipe out NOx sensor
(31) Heated DEF line
(32) DEF tank
(33) DEF tank header unit
(34) Engine Electronic Control Module (ECM)

Caterpillar Information System:

C3.4B Engines General Information
349F and 352F Excavators Machine System Specifications Front Lines
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
XQ400 Power Module Model View Illustrations
C8.7 Marine Engine Crankshaft Gear - Remove and Install
3512C Generator Set Engine Atmospheric Pressure Sensor - Remove and Install
3512C Generator Set Engine Crankcase Pressure Sensor - Remove and Install
XQ400 Power Module Safety Messages
2015/09/04 A New Breather Hose Is Now Used on Certain 3512 Engines {1317}
C8.7 Marine Engine Crankshaft Pulley - Remove and Install
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000} Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Assemble
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}
3512C Generator Set Engine Air Inlet Manifold - Remove and Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Rocker Shaft and Pushrod - Install
G3606 and G3608 Engines Gear Group (Rear) - Remove and Install
XQ400 Power Module Coolant Level - Check
XQ400 Power Module Fan Drive Bearing - Lubricate
XQ400 Power Module Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.