Air Inlet Manifold - Remove and Install
Start By:
- Remove exhaust manifold.
- Remove bolts (1), bolts (4), bolts (2), bolts (6), elbows (3), elbows (5), and the gaskets.
Show/hide table
Illustration 2 g03859888 - Remove bolts (7) and bracket (7).
Show/hide table
Illustration 3 g03859931 - Remove bolts (10) and bracket (9).
Show/hide table
Illustration 4 g03859945 - Disconnect hose assembly (12). Remove adapter (11).
Show/hide table
Illustration 5 g03859966 - Use a suitable lifting device to remove air inlet manifold (13). The weight of air inlet manifold (13) is approximately
65 kg (143 lb) . - Remove bolts (14) and air inlet manifold (13).
Show/hide table
Illustration 1 | g03859874 |
- Install air inlet manifold (13) in the reverse order of removal.
- Lubricate the bore of elbows (5) and elbows (3) with the lubricant that is being sealed.
Caterpillar Information System:
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
C280-08 Tier 4 Engine Turbocharger - Assemble
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C3.4B Engines Component Location
C3.4B Engines General Information
349F and 352F Excavators Machine System Specifications Front Lines
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
3512C Generator Set Engine Engine Speed Sensor - Remove and Install
XQ400 Power Module Model View Illustrations
C8.7 Marine Engine Crankshaft Gear - Remove and Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Rocker Shaft and Pushrod - Install
G3606 and G3608 Engines Gear Group (Rear) - Remove and Install
XQ400 Power Module Coolant Level - Check
XQ400 Power Module Fan Drive Bearing - Lubricate
XQ400 Power Module Plate Locations and Film Locations
XQ400 Power Module Sensors and Electrical Components
Energy Storage System Rectifier Configuration
C280 Marine Engines Air Inlet and Exhaust System Operation - Aftertreatment
HPU300 Hydraulic Power Pack Transport Information
New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620} New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620}
349F and 352F Excavators Machine System Specifications Coupler Lines